Change response status

Sometimes an upstream service does not communicate a failure via HTTP response status codes, but rather includes the failure information within the response body. But what if some of your downstream clients expect the status code to be set? In this tutorial we will see how to use transformations to change the HTTP status code based on the contents of the response payload.

Setup

This guide assumes that you installed the following components:

You also need an upstream service to serve as the target for the requests that you send to test the Gloo Edge configurations in this tutorial. You can use the publicly available Postman Echo service. Postman Echo exposes a set of endpoints that are very useful for inspecting both the requests sent upstream and the resulting responses. For more information about this service, see the Postman Echo documentation.

Create a static upstream to represent the postman-echo.com remote service.

apiVersion: gloo.solo.io/v1
kind: Upstream
metadata:
  name: postman-echo
  namespace: gloo-system
spec:
  static:
    hosts:
    - addr: postman-echo.com
      port: 80

Let’s also create a simple Virtual Service that matches any path and routes all traffic to our Upstream:


apiVersion: gateway.solo.io/v1
kind: VirtualService
metadata:
  name: update-response-code
  namespace: gloo-system
spec:
  virtualHost:
    domains:
    - '*'
    routes:
    - matchers:
       - prefix: /
      routeAction:
        single:
          upstream:
            name: postman-echo
            namespace: gloo-system
      options:
        autoHostRewrite: true

We will be sending POST requests to the upstream, so let’s create a simple JSON file that will constitute our request body. Create a file named data.json with the following content in your current working directory:

cat << EOF > data.json
{
  "error": {
    "message": "This is an error"
  }
}
EOF

Let’s test that the configuration was correctly picked up by Gloo Edge by executing the following command:

curl -v -H "Content-Type: application/json" $(glooctl proxy url)/post -d @data.json | jq

You should get a response with status 200 and a JSON body similar to this:

{
  "args": {},
  "data": {
    "error": {
      "message": "This is an error"
    }
  },
  "files": {},
  "form": {},
  "headers": {
    "x-forwarded-proto": "https",
    "host": "postman-echo.com",
    "content-length": "50",
    "accept": "*/*",
    "content-type": "application/json",
    "user-agent": "curl/7.54.0",
    "x-envoy-expected-rq-timeout-ms": "15000",
    "x-request-id": "65c4cf68-0a92-4650-a1a0-3d6104d24e51",
    "x-forwarded-port": "80"
  },
  "json": {
    "error": {
      "message": "This is an error"
    }
  },
  "url": "https://postman-echo.com/post"
}

Updating the response code

As you can see from the response above, the upstream service echoes the JSON payload we included in our request inside the data response body attribute. We will now configure Gloo Edge to change the response status to 400 if the data.error attribute is present; otherwise, the original status code should be preserved.

Update Virtual Service

To implement this behavior, we need to add the following to our Virtual Service definition:

Without the else statement, the status header is set to empty which will CRASH envoy since it expects the status header to have a nonempty value.

apiVersion: gateway.solo.io/v1
kind: VirtualService
metadata:
  name: update-response-code
  namespace: gloo-system
spec:
  virtualHost:
    domains:
    - '*'
    routes:
    - matchers:
       - prefix: /
      routeAction:
        single:
          upstream:
            name: postman-echo
            namespace: gloo-system
      options:
        autoHostRewrite: true
    options:
      transformations:
        responseTransformation:
          transformationTemplate:
            headers:
              # We set the response status via the :status pseudo-header based on the response code
              ":status":
                text: '{% if default(data.error.message, "") != "" %}400{% else %}{{ header(":status") }}{% endif %}'

The above options configuration is to be interpreted as following:

  1. Add a transformation to all traffic handled by this Virtual Host.
  2. Apply the transformation only to responses.
  3. Use a template transformation.
  4. Transform the “:status” pseudo-header according to the template string.

The template uses the Inja templating language to define the conditional logic that will be applied to the “:status” header.

Test our configuration

To test that our configuration has been correctly applied, let’s execute curl command again, with a slight modification so that it will only output the status code:

curl -s -o /dev/null -w "%{http_code}" -H "Content-Type: application/json" $(glooctl proxy url)/post -d @data.json

You should get the following output, representing the response code:

400%

Now let’s update the data.json file to turn error into an empty object:

cat << EOF > data.json
{
  "error": {}
}
EOF

If you execute the same curl command again, you should now get a 200 response:

curl -s -o /dev/null -w "%{http_code}" -H "Content-Type: application/json" $(glooctl proxy url)/post -d @data.json
200%

Cleanup

To cleanup the resources created in this tutorial you can run the following commands:

kubectl delete virtualservice -n gloo-system update-response-code
kubectl delete upstream -n gloo-system postman-echo