Navigation :

Traffic tapping

Copy contents of HTTP or gRPC requests and responses to an external tap server. A tap server is a simple device that connects directly to your infrastructure and receives copies of actual traffic from your network so that this traffic can be further monitored, analyzed, or tested with.

Traffic tapping support in Gloo Edge is introduced as an alpha feature. Alpha features are likely to change, are not fully tested, and are not supported for production.

Traffic tapping is an Enterprise-only feature.

About traffic tapping in Gloo Edge

Traffic tapping can be applied to a listener in a Gateway resource. As such, traffic tapping is applied to all routes that the gateway serves. Tapping traffic for a specific route is not currently supported.
Users are responsible for writing their own tap servers. The tap server definitions can be found in the tap-extension-examples repository. To receive tap traces, the tap server must implement the tap service protobuf definitions and be configured to receive data over the gRPC or HTTP protocol.
The tap-extension-examples repository is provided as an implementation reference. The repository is not intended to be used in production.
In the current implementation, the data plane buffers all trace data in memory before sending it to the tap server.
You cannot tap traffic to a local file.

Data that is tapped from the data plane might contain sensitive information, including credentials or Personal Identifiable Information (PII). Before using traffic tapping in your environment, make sure that all data is encrypted during transit and that sensitive data is masked or removed by the tap server before it is written to permanent storage or forwarded to another service. Note that you cannot use the Data Loss Preventation (DLP) plug-in to prevent sensitive data from being leaked via the tap filter.

Before you begin

Set up Gloo Edge Enterprise in your cluster. During the Gloo Edge installation, a gateway resource is created for you that you later use to configure traffic tapping.
Follow the steps to deploy and expose the Petstore sample app.

Deploy a tap server

Create the deployment, service, and upstream for the tap server in your cluster.

kubectl apply -f- <<EOF
apiVersion: apps/v1
kind: Deployment
metadata:
  labels:
    app: sample-tap-server-http
  name: sample-tap-server-http
  namespace: gloo-system
spec:
  selector:
    matchLabels:
      app: sample-tap-server-http
  replicas: 1
  template:
    metadata:
      labels:
        app: sample-tap-server-http
    spec:
      containers:
      - image: gcr.io/solo-test-236622/sample-tap-server-http:0.0.2
        name: sample-tap-server-http
        # args: ["-text='Hello World!'"]
        ports:
        - containerPort: 8080
          name: grpc
---
apiVersion: v1
kind: Service
metadata:
  name: sample-tap-server-http
  namespace: gloo-system
  labels:
    service: sample-tap-server-http
spec:
  ports:
  - port: 8080
    protocol: TCP
  selector:
    app: sample-tap-server-http
---
apiVersion: gloo.solo.io/v1
kind: Upstream
metadata:
  name: sample-tap-server-http
  namespace: gloo-system
spec:
  # useHttp2: true
  static:
    hosts:
    - addr: sample-tap-server-http
      port: 8080
EOF

Verify that the tap server is up and running.

kubectl get pods -n gloo-system | grep tap

Set up traffic tapping

Configure the gateway-proxy gateway resource for traffic tapping. In the following example, you instruct Gloo Edge to tap all incoming traffic on the gateway and to send it to the tap server that you previously configured by using the HTTP protocol.

kubectl apply -f- <<EOF
apiVersion: gateway.solo.io/v1
kind: Gateway
metadata:
  name: gateway-proxy
  namespace: gloo-system
spec:
  bindAddress: '::'
  bindPort: 8080
  httpGateway:
    options:
      tap:
        sinks:
        - httpService:
            tapServer:
              name: sample-tap-server-http
              namespace: gloo-system
            timeout: '20s'
EOF

In a terminal window, tail the logs of the tap server.

kubectl -n gloo-system logs deployments/sample-tap-server-http -f

In another terminal window, send a request to the Petstore app.

curl $(glooctl proxy url)/all-pets

Example output:

[{"id":1,"name":"Dog","status":"available"},{"id":2,"name":"Cat","status":"pending"}]

Go back to the logs of the tap server and verify that you can see the request to the Petstore app.

Example output:

2023/12/12 20:54:19 got a request on /
2023/12/12 20:54:19 Message contents were: {
  "trace_data": {
     "Trace": {
      "HttpBufferedTrace": {
        "request": {
          "headers": [
            {
              "key": ":authority",
              "value": "acbde4f6bb5a349eb8f83697b1295dbc-1834725307.us-east-2.elb.amazonaws.com"
            },
            {
              "key": ":path",
              "value": "/api/pets"
            },
            {
              "key": ":method",
              "value": "GET"
            },
            {
              "key": ":scheme",
              "value": "http"
            },
            {
              "key": "user-agent",
              "value": "curl/7.77.0"
            },
            {
              "key": "accept",
              "value": "*/*"
            },
            {
              "key": "x-forwarded-proto",
              "value": "http"
            },
            {
              "key": "x-request-id",
              "value": "08d56457-e8ea-4273-80c7-a448bb42733e"
            },
            {
              "key": "x-envoy-expected-rq-timeout-ms",
              "value": "15000"
            },
            {
              "key": "x-envoy-original-path",
              "value": "/all-pets"
            }
          ]
        },
        "response": {
          "headers": [
            {
              "key": ":status",
              "value": "200"
            },
            {
               "key": "content-type",
              "value": "application/xml"
            },
            {
              "key": "date",
              "value": "Tue, 12 Dec 2023 20:54:19 GMT"
            },
            {
              "key": "content-length",
              "value": "86"
            },
            {
              "key": "x-envoy-upstream-service-time",
              "value": "1"
            },
            {
              "key": "server",
              "value": "envoy"
            }
          ],
          "body": {
            "BodyType": {
              "AsBytes": "W3siaWQiOjEsIm5hbWUiOiJEb2ciLCJzdGF0dXMiOiJhdmFpbGFibGUifSx7ImlkIjoyLCJuYW1lIjoiQ2F0Iiwic3RhdHVzIjoicGVuZGluZyJ9XQo="
            }
          }
        }
      }
    }
  }
}

Clean up

You can optionally remove the resources that you created as part of this guide.

kubectl delete deployment sample-tap-server-http -n gloo-system
kubectl delete service sample-tap-server-http -n gloo-system
kubectl delete upstream sample-tap-server-http -n gloo-system
kubectl delete -f https://raw.githubusercontent.com/solo-io/gloo/v1.13.x/example/petstore/petstore.yaml