Upgrade gateways

Overview link

This upgrade process uses a canary upgrade model in which you run two versions of Istio simultaneously.

Istio recommends upgrading your Istio deployment by only one minor version at a time. If you want to upgrade multiple minor versions, such as from 1.20 to 1.22, upgrade incrementally from one version to the next minor version, such as first from 1.20 to 1.21, and then from 1.21 to 1.22.

Step 1: Gather gateway details and prepare revisions link

Before you begin the upgrade process, take inventory of the Istio service mesh and prepare for the new Istio revision.

1. If you have not already, deploy the Bookinfo sample application with your existing Istio installations to keep track of changes during the upgrade.

2. Verify that the version you want to upgrade to is tested and supported by the Solo distribution of Istio. If not, you might be able to upgrade Gloo Mesh Gateway, and then upgrade Istio.

3. Check the Istio release notes for the upgrade version to prepare for any breaking changes.

4. Note any resources that point to a specific Istio revision.

   • Custom Envoy filters: As a recommended practice, Envoy filters often target a specific Istio revision. When you create the Istio revision for the upgrade process, you might need to create filters that target the new Istio revision.
   • Namespaces: Note the Istio revisions that your service namespaces currently target.

       kubectl get namespace -L istio.io/rev
       

     Example output:

       NAME              STATUS   AGE   REV
     kube-system       Active   54m
     default           Active   54m   1-22
     bookinfo          Active   14s   1-22
       

5. Save the existing and new Istio versions as environment variables. Versions are formatted such as 1.23.2-patch1-solo and revisions are formatted such as 1-23.

   • For REPO, use a Solo repo key for the new image that you can get by logging in to the Support Center and reviewing the Istio images built by Solo.io support article.
   • For ISTIO_IMAGE, save the new version that you want to install, such as 1.23.2-patch1, and append the solo tag. You can optionally append other tags for the Solo distribution of Istio, as described in About the Solo distribution of Istio. If you downloaded a different version than the following, make sure to specify that version instead.
   • For REVISION, take the Istio major and minor version numbers and replace the period with a hyphen, such as 1-23.
   • For OLD_REVISION, take the Istio major and minor version numbers for your existing version, and replace the period with a hyphen, such as 1-22.

     REPO=<repo-key>
   ISTIO_IMAGE=<upgrade_version>
   REVISION=<upgrade_revision>
   OLD_REVISION=<existing_revision>
     

6. Save the name of the workload cluster that you want to upgrade Istio in as an environment variable. You reuse this variable when you repeat these steps for each workload cluster.

     export CLUSTER_NAME=$REMOTE_CLUSTER1
     

7. In a separate terminal, generate some traffic to the Bookinfo app to verify that access to the app is uninterrupted and zero downtime occurs during the upgrade.

   1. Install the HTTP load testing utility.
   2. Get the address of the Istio ingress gateway.

        export INGRESS_GW_ADDRESS=$(kubectl get svc -n istio-ingress istio-ingressgateway-${OLD_REVISION} -o jsonpath="{.status.loadBalancer.ingress[0]['hostname','ip']}")
      echo http://$INGRESS_GW_ADDRESS/productpage
        

   3. Navigate to http://$INGRESS_GW_ADDRESS/productpage in a web browser to verify that the productpage for Bookinfo is reachable.

        open http://$INGRESS_GW_ADDRESS/productpage
        

   4. Run the 15 minute load test that sends 10rps to localhost:8080/productpage.

        RUN_TIME_SECONDS=900
      
      echo "GET http://$INGRESS_GW_ADDRESS/productpage" | vegeta attack -rate 10/1s -duration=${RUN_TIME_SECONDS}s | vegeta encode > stats.json
      
      vegeta report stats.json
      
      vegeta plot stats.json > plot.html
        

Step 2: Deploy the new Istio control plane link

Deploy the Istio control plane for the new version that you want to upgrade to.

1. Download the Istio version that you want to upgrade to. The latest version supported by Solo, 1.23.2-patch1, is provided as an example.

   1. Download the new version.

        curl -L https://istio.io/downloadIstio | ISTIO_VERSION=1.23.2-patch1 sh -
        

   2. Navigate to the directory for the new version.

        cd ./istio-1.23.2-patch1
        

   3. Add the istioctl client to your path.

        export PATH=$PWD/bin:$PATH
        

2. Update the Helm repository for Istio.

     helm repo update
     

3. Upgrade the Istio CRDs.

     kubectl apply -f manifests/charts/base/crds
     

4. Prepare a Helm values file for the istiod control plane. For example, you might update the revision, hub, and tag values in the existing values file that you used to install your current control plane. You can also use this sample command to download an example file, istiod.yaml, and update the environment variables with the values that you previously set.

     curl -0L https://raw.githubusercontent.com/solo-io/gloo-mesh-use-cases/main/gloo-mesh/istio-install/manual-helm/istiod.yaml > istiod.yaml
   envsubst < istiod.yaml > istiod-values.yaml
     

5. Deploy the control plane that runs the new version to your cluster.

     helm upgrade --install istiod-${REVISION} istio/istiod \
     --version ${ISTIO_IMAGE} \
     --namespace istio-system \
     --wait \
     -f istiod-values.yaml
     

6. After the installation is complete, verify that the Istio control plane pods for the new revision are now running alongside the existing pods for the old revision.

     kubectl get pods -n istio-system
     

   Example output:

     NAME                           READY   STATUS    RESTARTS   AGE
   istiod-1-22-668dd8cc4c-6d49g   1/1     Running   0          42m
   istiod-1-22-668dd8cc4c-btx8d   1/1     Running   0          42m
   istiod-1-23-76fbc7b85c-7hh7f   1/1     Running   0          42s
   istiod-1-23-76fbc7b85c-m5mlc   1/1     Running   0          41s
     

Step 3: Update gateways and validate traffic link

Now that all the components for the new Istio version are deployed, you can deploy new Istio ingress and east-west gateways, and upgrade your apps’ Istio sidecars.

1. Prepare a Helm values file for an ingress gateway that runs the new revision. For example, you might update the revision, hub, and tag values in the existing values file that you used to install your current gateway. You can also use this sample command to download an example file, ingress-gateway.yaml, and update the environment variables with the values that you previously set.

     curl -0L https://raw.githubusercontent.com/solo-io/gloo-mesh-use-cases/main/gloo-mesh/istio-install/manual-helm/ingress-gateway.yaml > ingress-gateway.yaml
   envsubst < ingress-gateway.yaml > ingress-gateway-values.yaml
     

2. Create an ingress gateway that runs the new revision.

     helm upgrade --install istio-ingressgateway-${REVISION} istio/gateway \
     --version ${ISTIO_IMAGE} \
     --namespace istio-ingress \
     --wait \
     -f ingress-gateway-values.yaml
     

   check_circle

   New load balancers are created for the canary gateways. To instead change the revision in use by the existing gateway load balancers, you can set the `istio.io/rev` label on the gateway deployment, which triggers a rolling restart.

3. Multicluster setups only: Prepare a Helm values file for an east-west gateway that runs the new revision. For example, you might update the revision, hub, and tag values in the existing values file that you used to install your current gateway. You can also use this sample command to download an example file, eastwest-gateway.yaml, and update the environment variables with the values that you previously set.

     curl -0L https://raw.githubusercontent.com/solo-io/gloo-mesh-use-cases/main/gloo-mesh/istio-install/manual-helm/eastwest-gateway.yaml > eastwest-gateway.yaml
   envsubst < eastwest-gateway.yaml > eastwest-gateway-values.yaml
     

4. Create an east-west gateway that runs the new revision.

     helm upgrade --install istio-eastwestgateway-${REVISION} istio/gateway \
     --version ${ISTIO_IMAGE} \
     --namespace istio-eastwest \
     --wait \
     -f eastwest-gateway-values.yaml
     

5. Verify that the ingress and east-west gateway pods for the new revision are running alongside the existing gateways, and the load balancer services are assigned addresses.

     kubectl get pods -n istio-ingress
   kubectl get svc -n istio-ingress
   
   kubectl get pods -n istio-eastwest
   kubectl get svc -n istio-eastwest
     

6. Verify that the productpage for Bookinfo is still reachable after the upgrade.

     open http://$INGRESS_GW_ADDRESS/productpage
     

Step 4: Validate traffic link

Check the results of the load test to ensure traffic was uninterrupted throughout the upgrade process.

1. Once the 15 minute load test is complete in your other terminal, check the results of the traffic requests that were sent to Bookinfo during the upgrade. The following example output shows that 6000 200 response codes and no error codes were received.

     Requests      [total, rate, throughput]         6000, 10.00, 10.00
   Duration      [total, attack, wait]             15m0s, 15m0s, 26.776ms
   Latencies     [min, mean, 50, 90, 95, 99, max]  15.344ms, 29.06ms, 25.727ms, 33.811ms, 41.936ms, 85.286ms, 1.212s
   Bytes In      [total, mean]                     29091004, 4848.50
   Bytes Out     [total, mean]                     0, 0.00
   Success       [ratio]                           100.00%
   Status Codes  [code:count]                      200:6000  
   Error Set:
     

2. You can also check the graph of the results that was generated.

     open ./plot.html
     

In the following example graph, a spike in latency occurred when the Bookinfo application sidecars were updating. You might remedy this latency by adjusting the application scaling properties.

Step 5: Clean up previous resources link

After you validate your upgrade, clean up the Istio resources that run the previous version.

1. List the Istio Helm chart releases in the istio-ingress namespace. In the output, find the name of your old revision, such as istio-ingressgateway-1-22.

     helm ls -n istio-ingress
     

2. Delete the Helm release for the old ingress gateway.

     helm delete istio-ingressgateway-1-22 -n istio-ingress
     

3. List the Istio Helm chart releases in the istio-eastwest namespace. In the output, find the name of your old revision, such as istio-eastwestgateway-1-22.

     helm ls -n istio-eastwest
     

4. Delete the Helm release for the old east-west gateway.

     helm delete istio-eastwestgateway-1-22 -n istio-eastwest
     

5. Verify that only the new gateways are running.

     kubectl get pods -n istio-ingress
   kubectl get pods -n istio-eastwest
     

6. List the Istio Helm chart releases in the istio-system namespace. In the output, find the name of your old revision, such as istiod-1-22.

     helm ls -n istio-system
     

7. Delete the Helm release for the old control plane.

     helm delete istiod-1-22 -n istio-system
     

8. Verify that only the control plane pods for the new revision are running.

     kubectl get pods -n istio-system
     

Step 6: Repeat for each cluster link

After you complete these steps, repeat the process for each workload cluster where you installed Istio. Be sure to change the CLUSTER_NAME environment variable to point to each workload cluster, and use each workload cluster’s Kubernetes context.