Overview

Review the following information about the Istio control plane and gateway setup in this guide:

  • This installation guide installs a production-level Solo distribution of Istio, a hardened Istio enterprise image. For more information, see About the Solo distribution of Istio.
  • In multicluster setups, one ingress gateway for north-south traffic is deployed to each workload cluster. To learn about your gateway options, such as creating a global load balancer to route to each gateway IP address or registering each gateway IP address in one DNS entry, see the gateway deployment patterns page.
  • The east-west gateways in this architecture allow the Gloo Mesh Gateway in one cluster to route incoming traffic requests to services in another cluster. If you have a single-cluster Gloo Mesh Gateway setup, the east-west gateway deployment is not required.

Step 1: Set up tools

Set up the following tools and environment variables.

  1. Review Supported versions to choose the Solo distribution of Istio that you want to use, and save the version information in the following environment variables.

    • REPO: The repo key for the Solo distribution of Istio that you can get by logging in to the Support Center and reviewing the Istio images built by Solo.io support article.
    • ISTIO_IMAGE: The version that you want to use with the solo tag, such as 1.23.2-patch1-solo. You can optionally append other tags of Solo distributions of Istio as needed.
    • REVISION: Take the Istio major and minor versions and replace the periods with hyphens, such as 1-23.
    • ISTIO_VERSION: The version of Istio that you want to install, such as 1.23.2-patch1.
      export REPO=<repo-key>
export ISTIO_IMAGE=1.23.2-patch1-solo
export REVISION=1-23
export ISTIO_VERSION=1.23.2-patch1

  2. Install istioctl, the Istio CLI tool.

      curl -L https://istio.io/downloadIstio | ISTIO_VERSION=${ISTIO_VERSION} sh -
cd istio-$ISTIO_VERSION
export PATH=$PWD/bin:$PATH

  3. Add and update the Helm repository for Istio.

      helm repo add istio https://istio-release.storage.googleapis.com/charts
helm repo update

Step 2: Prepare the cluster environment

Prepare the workload cluster for Istio installation, including installing the Istio custom resource definitions (CRDs).

  1. Save the name and kubeconfig context of a workload cluster in the following environment variables. Each time you repeat the steps in this guide, you change these variables to the next workload cluster’s name and context.

      export CLUSTER_NAME=<remote-cluster>
export REMOTE_CONTEXT=<remote-cluster-context>

  2. Ensure that the Istio operator CRD (istiooperators.install.istio.io) is not managed by the Gloo Platform CRD Helm chart.

      kubectl get crds -A --context $REMOTE_CONTEXT | grep istiooperators.install.istio.io
    • If the CRD does not exist on your cluster, you disabled it during the Gloo Mesh installation. Continue to the next step.
    • If the CRD exists on your cluster, follow these steps to remove the Istio operator CRD from the gloo-platform-crds Helm release:
      1. Update the Helm repository for Gloo Platform.
          helm repo add gloo-platform https://storage.googleapis.com/gloo-platform/helm-charts
helm repo update
      2. Upgrade your gloo-platform-crds Helm release in the workload cluster by including the --set installIstioOperator=false flag.
          helm upgrade gloo-platform-crds gloo-platform/gloo-platform-crds \
   --kube-context $REMOTE_CONTEXT \
   --namespace=gloo-mesh \
   --set installIstioOperator=false

  3. Install the Istio CRDs.

      helm upgrade --install istio-base istio/base \
  -n istio-system \
  --version $ISTIO_VERSION \
  --kube-context $REMOTE_CONTEXT \
  --create-namespace

  4. Create the istio-config namespace. This namespace serves as the administrative root namespace for Istio configuration.

      kubectl create namespace istio-config --context $REMOTE_CONTEXT

  5. OpenShift only: Deploy the Istio CNI plug-in, and elevate the istio-system service account permissions.

    1. Install the CNI plug-in, which is required for using Istio in OpenShift.
        helm install istio-cni istio/cni \
--namespace kube-system \
--kube-context $REMOTE_CONTEXT \
--version $ISTIO_VERSION \
--set cni.cniBinDir=/var/lib/cni/bin \
--set cni.cniConfDir=/etc/cni/multus/net.d \
--set cni.cniConfFileName="istio-cni.conf" \
--set cni.chained=false \
--set cni.privileged=true
    2. Elevate the permissions of the following service accounts that will be created. These permissions allow the to make use of a user ID that is normally restricted by OpenShift. For more information, see the Istio on OpenShift documentation.
        oc adm policy add-scc-to-group anyuid system:serviceaccounts:istio-system --context $REMOTE_CONTEXT
oc adm policy add-scc-to-group anyuid system:serviceaccounts:istio-config --context $REMOTE_CONTEXT
oc adm policy add-scc-to-group anyuid system:serviceaccounts:istio-ingress --context $REMOTE_CONTEXT
oc adm policy add-scc-to-group anyuid system:serviceaccounts:istio-eastwest --context $REMOTE_CONTEXT
    3. Create a NetworkAttachmentDefinition custom resource for the istio-ingress project. If you plan to create the Istio gateways in a different namespace, such as istio-gateways, make sure to create the NetworkAttachmentDefinition in that namespace instead.
        cat <<EOF | oc create -n istio-ingress --context $REMOTE_CONTEXT -f -
apiVersion: "k8s.cni.cncf.io/v1"
kind: NetworkAttachmentDefinition
metadata:
  name: istio-cni
EOF

Step 3: Deploy the Istio control plane

Deploy an Istio control plane in your workload cluster. The provided Helm values files are configured with production-level settings; however, depending on your environment, you might need to edit settings to achieve specific Istio functionality.

  1. Prepare a Helm values file for the istiod control plane. You can further edit the file to provide your own details for production-level settings.

    1. Download an example file, istiod.yaml, and update the environment variables with the values that you previously set.

        curl -0L https://raw.githubusercontent.com/solo-io/gloo-mesh-use-cases/main/gloo-mesh/istio-install/manual-helm/istiod.yaml > istiod.yaml
envsubst < istiod.yaml > istiod-values.yaml

    2. Optional: Trust domain validation is disabled by default in the profile that you downloaded in the previous step. If you have a multicluster mesh setup and you want to enable trust domain validation, add all the clusters that are part of your mesh in the meshConfig.trustDomainAliases field, excluding the cluster that you currently prepare for the istiod installation. For example, let’s say you have 3 clusters that belong to your mesh: cluster1, cluster2, and cluster3. When you install istiod in cluster1, you set the following values for your trust domain:

        ...
meshConfig:
  trustDomain: cluster1
  trustDomainAliases: ["cluster2","cluster3"]

      Then, when you move on to install istiod in cluster2, you set trustDomain: cluster2 and trustDomainAliases: ["cluster1","cluster3"]. You repeat this step for all the clusters that belong to your service mesh. Note that as you add or delete clusters from your service mesh, you must make sure that you update the trustDomainAliases field for all of the clusters.

  2. Create the istiod control plane in your cluster.

      helm upgrade --install istiod-$REVISION istio/istiod \
  --version $ISTIO_VERSION \
  --namespace istio-system \
  --kube-context $REMOTE_CONTEXT \
  --wait \
  -f istiod-values.yaml

  3. After the installation is complete, verify that the Istio control plane pods are running.

      kubectl get pods -n istio-system --context $REMOTE_CONTEXT

    Example output for 2 replicas:

      NAME                          READY   STATUS    RESTARTS   AGE
istiod-1-23-7b96cb895-4nzv9   1/1     Running   0          30s
istiod-1-23-7b96cb895-r7l8k   1/1     Running   0          30s

Step 4 (multicluster setups): Deploy the Istio east-west gateway

If you have a multicluster setup, deploy an Istio east-west gateway into each cluster in addition to the ingress gateway. In Gloo Mesh Gateway, the east-west gateways allow the ingress gateway in one cluster to route incoming traffic requests to services in another cluster.

  1. Prepare a Helm values file for the Istio east-west gateway. This sample command downloads an example file, eastwest-gateway.yaml, and updates the environment variables with the values that you previously set. You can further edit the file to provide your own details for production-level settings.

      curl -0L https://raw.githubusercontent.com/solo-io/gloo-mesh-use-cases/main/gloo-mesh/istio-install/manual-helm/eastwest-gateway.yaml > eastwest-gateway.yaml
envsubst < eastwest-gateway.yaml > eastwest-gateway-values.yaml

  2. Create the east-west gateway.

      helm upgrade --install istio-eastwestgateway-$REVISION istio/gateway \
  --version $ISTIO_VERSION \
  --create-namespace \
  --namespace istio-eastwest \
  --kube-context $REMOTE_CONTEXT \
  --wait \
  -f eastwest-gateway-values.yaml

  3. Verify that the east-west gateway pods are running and the load balancer service is assigned an external address.

      kubectl get pods -n istio-eastwest --context $REMOTE_CONTEXT
kubectl get svc -n istio-eastwest --context $REMOTE_CONTEXT

    Example output:

      NAME                                        READY   STATUS    RESTARTS   AGE
istio-eastwestgateway-1-23-7f6f8f7fc7-ncrzq   1/1     Running   0          11s
istio-eastwestgateway-1-23-7f6f8f7fc7-ncrzq   1/1     Running   0          48s
NAME                             TYPE           CLUSTER-IP      EXTERNAL-IP   PORT(S)                                                                                                      AGE
istio-eastwestgateway-1-23       LoadBalancer   10.96.166.166   <externalip>  15021:32343/TCP,80:31685/TCP,443:30877/TCP,31400:31030/TCP,15443:31507/TCP,15012:30668/TCP,15017:30812/TCP   13s

Step 5: Deploy the Istio ingress gateway

Deploy Istio ingress gateways to allow incoming traffic requests to your apps.

  1. Prepare a Helm values file for the Istio ingress gateway. This sample command downloads an example file, ingress-gateway.yaml, and updates the environment variables with the values that you previously set. You can further edit the file to provide your own details for production-level settings.

      curl -0L https://raw.githubusercontent.com/solo-io/gloo-mesh-use-cases/main/gloo-mesh/istio-install/manual-helm/ingress-gateway.yaml > ingress-gateway.yaml
envsubst < ingress-gateway.yaml > ingress-gateway-values.yaml

  2. Create the ingress gateway.

      helm upgrade --install istio-ingressgateway-$REVISION istio/gateway \
  --version $ISTIO_VERSION \
  --create-namespace \
  --namespace istio-ingress \
  --kube-context $REMOTE_CONTEXT \
  --wait \
  -f ingress-gateway-values.yaml

  3. Verify that the ingress gateway pods are running and the load balancer service is assigned an external address.

      kubectl get pods -n istio-ingress --context $REMOTE_CONTEXT
kubectl get svc -n istio-ingress --context $REMOTE_CONTEXT

    Example output:

      NAME                                       READY   STATUS    RESTARTS   AGE
istio-ingressgateway-1-23-665d46686f-nhh52   1/1     Running   0          106s
istio-ingressgateway-1-23-665d46686f-tlp5j   1/1     Running   0          2m1s
NAME                             TYPE           CLUSTER-IP      EXTERNAL-IP   PORT(S)                                                                                                      AGE
istio-ingressgateway-1-23        LoadBalancer   10.96.252.49    <externalip>  15021:32378/TCP,80:30315/TCP,443:32186/TCP,31400:30313/TCP,15443:31632/TCP                                   2m2s

  4. Optional for OpenShift: Expose the load balancer by using an OpenShift route.

      oc -n istio-ingress expose svc istio-ingressgateway-1-23 --port=http2 --context $REMOTE_CONTEXT

Step 6 (multicluster setups): Repeat steps 2 - 5

If you have a multicluster Gloo Mesh setup, repeat steps 2 - 5 for each workload cluster that you want to install Istio on. Remember to change the cluster name and context variables each time you repeat the steps.

  export CLUSTER_NAME=<remote-cluster>
export REMOTE_CONTEXT=<remote-cluster-context>

Next steps