Launch the UI

The Gloo UI is served from the gloo-mesh-ui service on port 8090. When you have access to the management cluster, you can launch the Gloo UI from your local machine. You can connect by using the meshctl or kubectl CLIs.

  1. Open the Gloo UI. The Gloo UI is served from the gloo-mesh-ui service on port 8090. You can connect by using the meshctl or kubectl CLIs.

    • meshctl: For more information, see the CLI documentation.
        meshctl dashboard
        
    • kubectl:
      1. Port-forward the gloo-mesh-ui service on 8090.
          kubectl port-forward -n gloo-mesh svc/gloo-mesh-ui 8090:8090
          
      2. Open your browser and connect to http://localhost:8090.
  2. Optional: If authentication is enabled, sign in.
  3. Review the dashboard.

Home

View the health and performance of your Gloo components and gateways, and view recommendations to harden your setup by using the Dashboard and Insights pages.

Dashboard

The Gloo UI dashboard provides an at-a-glance overview of the health of your Gloo components, your Istio gateways installation, and different tiles to quickly determine the security posture, compliance, inventories, and health of your Gloo Network environment.

Figure: Gloo UI dashboard

Insights

Gloo Mesh Gateway comes with an insights engine that automatically analyzes your Istio gateways for health issues. Then, Gloo shares these issues along with recommendations to harden your Istio gateway setup. The insights give you a checklist to address issues that might otherwise be hard to detect across your environment. For an overview of available insights, see Insights.

Figure: Gloo insights

Inventory

The Inventory section provides an at-a-glance look at the health of registered clusters and discovered services that make up your Gloo environment.

Clusters

On the Clusters page, review basic details of each cluster that you registered with the Gloo management plane.

  1. To filter clusters by the cluster’s Gloo Network installation health, click the Healthy and Unhealthy buttons. You can also use the Sort by Name dropdown or the search bar to filter clusters by name.

    Figure: Clusters page
  2. Click More Details to see a more detailed dashboard for the cluster. This dashboard can help you find errors in your Gloo and Istio setups.

    Note that if you run multiple versions of Istio within the same cluster, you can click each version in Version tab to see its details.

    Figure: Cluster details page

Services

On the Services page, review a list of the discovered services across all clusters in your Gloo setup. Quickly find out if traffic cannot reach your services by clicking the Healthy and Unhealthy buttons. You can also filter services by name using the search bar, filter by in-mesh and out-of-mesh services, and modify the timeframe that services are available in by using the dropdown menu.

Figure: Services page
Figure: Services page

Note that the health of your services on the Services overview page refers to whether network traffic requests are getting fulfilled by the service. You can review the configuration health of the service by clicking Details.

From the Details page of a service:

  • To debug the service, click View YAML to view the service’s YAML configuration.
  • See an analysis of the service’s error rate and latency in the Service Signals card.
  • View the Graph tab to visualize the network traffic that reaches your service mesh. For more information about how to use the graph, see Graph.
  • If you enable tracing in the Gloo telemetry pipeline, you can see request traces for a service in the built-in Jaeger UI that you can find in the Tracing tab. For more information about how to enable and use the tracing interface, see Tracing.
Figure: Services page
Figure: Services page

Traffic

Review the configuration of ingress and egress gateways in your Gloo Network environment.

Ingress

View the Gateway resources for the Istio ingress gateway proxies in your environment. This page helps you quickly see which domains and ports each gateway serves, the services that back each gateway, and whether the gateway is configured with a TLS certificate. For more information, see the Deploy Gloo-managed service meshes.

Figure: Ingress gateways UI screenshot
Figure: Ingress gateways UI screenshot

Egress

View the requests that services in your environment make to destinations that are external to your environment. The destination, if known, is listed in the Host Name column, and the egress gateway that the request is made through is listed in the Consuming Services column. For more information, see Deploy Gloo-managed service meshes.

Figure: Egress traffic UI screenshot
Figure: Egress traffic UI screenshot

Security

Security insights

The Dashboard and Security Insights pages of the Gloo UI can help you review the overall security posture of your Istio setup, including insights and recommendations regarding your certificates, encrypted traffic, FIPS compliance, and more.

For more information, see Review your security posture.

Certificates

View a list of all certificates for your Istio setup. This list provides the Filter by expiration… dropdown to filter insights by validity status, and the Filter by type… dropdown to filter certificates by type, such as root or intermediate. To view the details of a certificate, such as the issue details, total validity period, and fingerprints, click More details.

Figure: Certificates details card
Figure: Certificates details card

Resources

Find an overview of resources that are deployed in your cluster and use the filter options in the Gloo UI to find the resource that you need.

Solo

View the Gloo resources in your Gloo Network environment, such as IstioLifecycleManager resources. Use the Filter by options to filter the list by resource type. To view the YAML configuration for a resource, click View YAML.

Figure: Solo resources page
Figure: Solo resources page

Istio

View the Istio resources in your Gloo Network environment, such as virtual services, gateways, or Istio operators. Use the Filter options to filter the list by namespace and Istio resource type. To view the YAML configuration for a resource, click View YAML.

Figure: Istio resources page
Figure: Istio resources page

Cilium

View the Cilium network policies that you applied to your workloads. In the following example, the rule1 Cilium policy that you can create in the quickstart guide is listed.

Figure: Cilium resources page
Figure: Cilium resources page

Gateway API

View all Kubernetes Gateway API resources in your environment. For more information, see the Kubernetes Gateway API guide in the Istio documentation.

Kubernetes

View all Kubernetes resources in your cluster, such as services, service accounts, secrets, or cluster roles. Use the Filter options to filter the list by namespace and Kubernetes resource type. To view the YAML configuration for a resource, click View YAML.

Figure: Kubernetes resources page
Figure: Kubernetes resources page

Observability

The Gloo UI consumes telemetry data from Prometheus and Jaeger and visualizes this data in the Observability section.

Graph

The Gloo UI includes a Graph page to visualize the network traffic that reaches your service mesh. The graph is based off Prometheus metrics that the agents on each workload cluster send the management cluster.

Layout settings

From the footer toolbar, click Layout Settings. Toggle on or off the following settings.

Graph UI layout settings

Header, filter, and footer toolbars for navigation

Legend

From the footer toolbar, click Show Legend.

Node Types describes the icons that are used for the application “nodes” of the graph. For example, a node might be a Kubernetes service, Istio gateway, external service, or an attached virtual machine (VM). (Note that nodes represent your apps, not Kubernetes compute nodes.)

Node States and Edges show whether a service’s traffic behaves normally or not, as indicated by a color or icon.

Color or iconStateDescription
BlueNormalThe node sends and responds to traffic as expected.
RedDangerThe node has some sort of failure. For example, a policy might be applied to a route that blocks traffic to a service.
YellowWarnThe node has some sort of degraded traffic. For example, a policy might be applied to a route that rate limits traffic to a service. Most of the requests are successful, but some are not.
GrayIdleThe node does not yet accept or send traffic. For example, the deployment might be pending.
Dashed, black lineL7The traffic between nodes is sent over Layer 7 (application). For this traffic, you can apply L7 HTTP/HTTPS policies that are supported in Gloo Mesh Enterprise and Gloo Mesh Gateway only.
Solid, navy lineL4The traffic between nodes is sent over Layer 4 (transport).
Colorful trianglesFailure, Healthy, Degraded, or IdleThe connection is in a state of failure, healthy, degraded, or idle, depending on the color. Try describing the resources in your cluster to troubleshoot further.
Blue lock iconmTLS appliedService isolation is enabled for the traffic, with communication secured via mTLS. You can change service isolation settings via an access policy for a specific destination, or for the entire workspace via the workspace settings.
Istio iconEnforced by IstioThe traffic connection is enforced by Istio.
Figure: Graph UI legend
Figure: Graph UI legend

Networking views

Tracing

Gloo Network integrates with Jaeger as the tracing platform. Jaeger is an open source tool that helps you follow the path of a request as it is forwarded between microservices. The chain of events and interactions are then captured by the Gloo telemetry pipeline and visualized in the Jaeger UI that is embedded on the Tracing page of the Gloo UI. You can use this data to troubleshoot issues in your microservices and identify bottlenecks.

To access the Jaeger UI through the Gloo UI, you must enable tracing in the Gloo telemetry pipeline and instrument your apps to collect traces. If you have an existing Jaeger instance that you want to use to visualize traces, you can configure the Gloo UI to embed the UI of your Jaeger instance. For more information, see Add Istio request traces.

Figure: Tracing UI

Logs

You can use the Gloo UI log viewer to see the logs of Gloo components, such as the Gloo management server, the Gloo telemetry collector agent, or the Gloo UI. These logs can help you monitor the health of your Gloo components and troubleshoot issues.

To view logs, use the log viewer filter options to select the cluster, Gloo Network component, pod name, and, if applicable, the container that you want to check the logs for. You can also use the search capability to find logs that match a specific search term, or download the logs so that you can share them with your team.

Figure: Log viewer