Keycloak

You can install an OpenID Connect (OIDC) identity provider (IdP) such as Keycloak in your cluster. Then, configure the Gloo Mesh Gateway external auth server with the OIDC details. You can adapt these steps for other IdPs.

Before you begin link

1. Set up Gloo Mesh Gateway in a single cluster.
2. Install Bookinfo and other sample apps.

3. Configure an HTTP listener on your gateway and set up basic routing for the sample apps.

4. Make sure that the external auth service is installed and running. If not, install the external auth service.

     kubectl get pods -A -l app=ext-auth-service
     

5. Get the external address of your ingress gateway. The steps vary depending on the type of load balancer that backs the ingress gateway.

     export INGRESS_GW_ADDRESS=$(kubectl get svc -n gloo-mesh-gateways istio-ingressgateway -o jsonpath="{.status.loadBalancer.ingress[0]['hostname','ip']}")
   echo $INGRESS_GW_ADDRESS
     

   Note: Depending on your environment, you might see <pending> instead of an external IP address. For example, if you are testing locally in kind or minikube, or if you have insufficient permissions in your cloud platform, you can instead port-forward the service port of the ingress gateway:

     kubectl -n gloo-mesh-gateways port-forward deploy/istio-ingressgateway-1-22 8081
     

Step 1: Install Keycloak link

You might want to test how to restrict access to your applications to authenticated users, such as with external auth or JWT policies. You can install Keycloak in your cluster as an OpenID Connect (OIDC) provider.

The following steps install Keycloak in your cluster, and configure two user credentials as follows.

• Username: user1, password: password, email: user1@example.com
• Username: user2, password: password, email: user2@solo.io

Install and configure Keycloak:

1. Create a namespace for your Keycloak deployment.

     kubectl create namespace keycloak
     

2. Create the Keycloak deployment.

     kubectl -n keycloak apply -f https://raw.githubusercontent.com/solo-io/gloo-mesh-use-cases/main/policy-demo/oidc/keycloak.yaml
     

3. Wait for the Keycloak rollout to finish.

     kubectl -n keycloak rollout status deploy/keycloak
     

4. Set the Keycloak endpoint details from the load balancer service.

     export ENDPOINT_KEYCLOAK=$(kubectl -n keycloak get service keycloak -o jsonpath='{.status.loadBalancer.ingress[0].*}'):8080
   export HOST_KEYCLOAK=$(echo ${ENDPOINT_KEYCLOAK} | cut -d: -f1)
   export PORT_KEYCLOAK=$(echo ${ENDPOINT_KEYCLOAK} | cut -d: -f2)
   export KEYCLOAK_URL=http://${ENDPOINT_KEYCLOAK}
   echo $KEYCLOAK_URL
     

5. Set the Keycloak admin token. If you see a parsing error, try running the curl command by itself. You might notice that your internet provider or network rules are blocking the requests. If so, you can update your security settings or change the network so that the request can be processed.

     export KEYCLOAK_TOKEN=$(curl -d "client_id=admin-cli" -d "username=admin" -d "password=admin" -d "grant_type=password" "$KEYCLOAK_URL/realms/master/protocol/openid-connect/token" | jq -r .access_token)
   echo $KEYCLOAK_TOKEN
     

6. Use the admin token to configure Keycloak with the two users for testing purposes. If you get a 401 Unauthorized error, run the previous command and try again.

     # Create initial token to register the client
   read -r client token <<<$(curl -H "Authorization: Bearer ${KEYCLOAK_TOKEN}" -X POST -H "Content-Type: application/json" -d '{"expiration": 0, "count": 1}' $KEYCLOAK_URL/admin/realms/master/clients-initial-access | jq -r '[.id, .token] | @tsv')
   export KEYCLOAK_CLIENT=${client}
   echo $KEYCLOAK_CLIENT
   
   # Register the client
   read -r id secret <<<$(curl -k -X POST -d "{ \"clientId\": \"${KEYCLOAK_CLIENT}\" }" -H "Content-Type:application/json" -H "Authorization: bearer ${token}" ${KEYCLOAK_URL}/realms/master/clients-registrations/default| jq -r '[.id, .secret] | @tsv')
   export KEYCLOAK_SECRET=${secret}
   echo $KEYCLOAK_SECRET
   
   # Add allowed redirect URIs
   curl -k -H "Authorization: Bearer ${KEYCLOAK_TOKEN}" -X PUT -H "Content-Type: application/json" -d '{"serviceAccountsEnabled": true, "directAccessGrantsEnabled": true, "authorizationServicesEnabled": true, "redirectUris": ["*"]}' $KEYCLOAK_URL/admin/realms/master/clients/${id}
   
   # Add the group attribute in the JWT token returned by Keycloak
   curl -H "Authorization: Bearer ${KEYCLOAK_TOKEN}" -X POST -H "Content-Type: application/json" -d '{"name": "group", "protocol": "openid-connect", "protocolMapper": "oidc-usermodel-attribute-mapper", "config": {"claim.name": "group", "jsonType.label": "String", "user.attribute": "group", "id.token.claim": "true", "access.token.claim": "true"}}' $KEYCLOAK_URL/admin/realms/master/clients/${id}/protocol-mappers/models
   
   # Create first user
   curl -H "Authorization: Bearer ${KEYCLOAK_TOKEN}" -X POST -H "Content-Type: application/json" -d '{"username": "user1", "email": "user1@example.com", "firstName": "Alice", "lastName": "Doe", "enabled": true, "attributes": {"group": "users"}, "credentials": [{"type": "password", "value": "password", "temporary": false}]}' $KEYCLOAK_URL/admin/realms/master/users
   
   # Create second user
   curl -H "Authorization: Bearer ${KEYCLOAK_TOKEN}" -X POST -H "Content-Type: application/json" -d '{"username": "user2", "email": "user2@solo.io", "firstName": "Bob", "lastName": "Doe", "enabled": true, "attributes": {"group": "users"}, "credentials": [{"type": "password", "value": "password", "temporary": false}]}' $KEYCLOAK_URL/admin/realms/master/users
     

7. Open the Keycloak frontend.

     open $KEYCLOAK_URL
     

8. Log in to the admin console, and enter admin as the username and admin as your password.

9. In the Keycloak admin console, go to Users, and verify that the users that created earlier are displayed. You might need to click on View all users to see them.

10. In the Keycloak admin console, go to Clients, and verify that you can see a client ID that equals the output of $KEYCLOAK_CLIENT.

Step 2: Configure Keycloak link

Now that you installed Keycloak and set up clients to use, configure Keycloak for certain OAuth use cases. The following instructions assume that you are still logged into the Administration Console from the previous step.

You might integrate OIDC with your apps. In such cases, you might need particular details from the OIDC provider to fully set up your apps. To use Keycloak for OAuth protection of these apps, you need certain settings and information from Keycloak.

1. For authorization code OAuth: Confirm that you have the following environmental variables set. If not, refer to the Before you begin and Step 1: Install Keycloak sections.

     echo $CLUSTER_NAME
   echo $INGRESS_GW_ADDRESS
   echo $KEYCLOAK_CLIENT
   echo $KEYCLOAK_URL
     

2. If you plan to use access token validation: Get a JWKS URI to use for an inline OAuth policy.

   1. From the sidebar menu options, click Realm Settings.
   2. From the General tab, scroll down to the Endpoints section and open the OpenID Endpoint Configuration link. In a new tab, your browser opens to a URL similar to http://$KEYCLOAK_URL:8080/realms/master/.well-known/openid-configuration.
   3. In the OpenID configuration, search for the token_endpoint field. Save the value as an environment variable, such as the following example.

        export TOKEN_ENDPOINT=$KEYCLOAK_URL/realms/master/protocol/openid-connect/token
        

   4. In the OpenID configuration, search for the jwks_uri field, and copy this value, similar to http://$KEYCLOAK_URL:8080/realms/master/protocol/openid-connect/certs.

        export KEYCLOAK_JWKS_URI=<jwks_uri>
        

   5. In a new browser tab, open the jwks_uri that you previously copied.
   6. From the opened jwks_uri, copy and save the entire value of the keys as an environment variable.

        export KEYCLOAK_CERT_KEYS={"keys":[{"kid":"_YYA...","kty":"RSA","alg":"RSA-OAEP","use":"enc","n":"r4AXlC9sR..."}]}
        

3. If you plan to use the developer portal: Configure your Keycloak client with the appropriate settings for the developer portal frontend authentication.

   1. From the Keycloak sidebar menu options, click Clients.
   2. Click the Client ID that matches the $KEYCLOAK_CLIENT that you previously set.
   3. From the client Settings tab, find the Access settings and update the following fields.
      • Valid redirect URIs field with * wildcard or the domain that you want to use for redirects.
      • Valid post logout redirect URIs field with * wildcard or the domain that you want to use for logout redirects.
      • Web origins field with * wildcard to allow all origins.
   4. Scroll down to the Capability config section and update the following sections:
      • Toggle the Client authentication setting to Off to enable public access.
      • In the Authentication flow section, enable the Standard flow and Direct access grants options.
   5. At the bottom of the form, click Save. The Client successfully updated message pops up to confirm your settings are saved.
   6. From the client Advanced tab, find the Advanced settings. Set the Proof Key for Code Exchange Code Challenge Method dropdown to S256. For more information on PKCE, refer to RFC 7636.
   7. Scroll down and click Save. The Client successfully updated message pops up to confirm your settings are saved.

4. If you plan to use the developer portal: Get the OIDC endpoint details.

   1. From the Keycloak sidebar menu options, click Realm Settings.
   2. From the General tab, scroll down to the Endpoints section and open the OpenID Endpoint Configuration link. In a new tab, your browser opens to a URL similar to http://$KEYCLOAK_URL:8080/realms/master/.well-known/openid-configuration
   3. In the OpenID configuration, search for the token_endpoint field. Save the value as an environment variable, such as the following example.

        export TOKEN_ENDPOINT=$KEYCLOAK_URL/realms/master/protocol/openid-connect/token
        

   4. In the OpenID configuration, search for the authorization_endpoint field. Save the value as an environment variable, such as the following example.

        export AUTH_ENDPOINT=$KEYCLOAK_URL/realms/master/protocol/openid-connect/auth
        

   5. In the OpenID configuration, search for the end_session_endpoint field. Save the value as an environment variable, such as the following example.

        export LOGOUT_ENDPOINT=$KEYCLOAK_URL/realms/master/protocol/openid-connect/logout
        

Step 3: Prepare resources for external auth link

Create resources that you need for external auth, such as a Gloo external auth server and route table with a label that you can use to apply policies.

1. Create a Kubernetes secret with the Keycloak OIDC secret.

     kubectl apply -f - <<EOF
   apiVersion: v1
   kind: Secret
   metadata:
     name: oauth
     namespace: gloo-mesh
   type: extauth.solo.io/oauth
   stringData:
     client-secret: ${KEYCLOAK_SECRET
   EOF
     

2. Create an external auth server to use for your policy. The example uses the default external auth server that you created when you installed Gloo Platform.

     kubectl apply -f - <<EOF
   apiVersion: admin.gloo.solo.io/v2
   kind: ExtAuthServer
   metadata:
     name: ext-auth-server
     namespace: gloo-mesh
   spec:
     destinationServer:
       ref:
         cluster: $CLUSTER_NAME
         name: ext-auth-service
         namespace: gloo-mesh
       port:
         name: grpc
   EOF
     

3. Create a route table for the httpbin app and external auth policy. Note that the route table selects the virtual gateway that you created before you began, and routes to the httpbin service.

     kubectl apply -f - <<EOF
   apiVersion: networking.gloo.solo.io/v2
   kind: RouteTable
   metadata:
     name: httpbin
     namespace: httpbin
     labels:
       expose: "true"
   spec:
     hosts:
       - '*'
     virtualGateways:
       - name: istio-ingressgateway
         namespace: bookinfo
         cluster: $CLUSTER_NAME
     workloadSelectors: []
     http:
       - name: httpbin
         labels:
           oauth: "true"
         matchers:
         - uri:
             exact: /get
         - uri:
             prefix: /callback
         forwardTo:
           destinations:
           - kind: SERVICE
             ref:
               name: httpbin
               namespace: httpbin
               cluster: $CLUSTER_NAME
             port:
               number: 8000
   EOF
     

Step 4: Create an OAuth policy link

Create the external auth policy that uses Keycloak as the OIDC provider. The steps vary depending on how you want to configure the OAuth, with an authorization code or access token validation. For more information about these types, see Supported types of OAuth2.

• Authorization code
• Access token

Configure OAuth with authorization codes link

Create an external auth policy that uses authorization codes, such as the following example YAML. Review the following table to understand this configuration. For more information, see the API reference docs for OidcAuthorizationCode.

  kubectl apply -f - <<EOF
apiVersion: security.policy.gloo.solo.io/v2
kind: ExtAuthPolicy
metadata:
  name: oauth-auth-code
  namespace: gloo-mesh
spec:
  applyToRoutes:
  - route:
      labels:
        oauth: "true"
  config:
    server:
      name: ext-auth-server
      namespace: gloo-mesh
      cluster: $CLUSTER_NAME
    glooAuth:
      configs:
      - oauth2:
          oidcAuthorizationCode:
            appUrl: "https://${INGRESS_GW_ADDRESS}:443"
            callbackPath: /callback
            clientId: ${KEYCLOAK_CLIENT}
            clientSecretRef:
              name: oauth
              namespace: gloo-mesh
            issuerUrl: "${KEYCLOAK_URL}/realms/master/"
            scopes:
            - email
            session:
              failOnFetchFailure: true
              redis:
                cookieName: keycloak-session
                options:
                  host: redis:6379
            headers:
              idTokenHeader: jwt
EOF
  

Configure OAuth with access token validation link

Create an external auth policy that uses access token validation. The following example YAML uses JWT validation and an inline JWKS server to provide the JWT.

• For more access token validation options, see the API reference docs for AccessTokenValidation.
• For more information about JWTs, see the JWT policy guide.
• For more JWT options such as to fetch the token from a remote JWKS instead of an inline JWKS, see the API reference docs for JwtValidation.

  kubectl apply -f - <<EOF
apiVersion: security.policy.gloo.solo.io/v2
kind: ExtAuthPolicy
metadata:
  name: oauth-jwt-validation
  namespace: gloo-mesh
spec:
  applyToRoutes:
  - route:
      labels:
        oauth: "true"
  config:
    server:
      name: ext-auth-server
      namespace: gloo-mesh
      cluster: $CLUSTER_NAME
    glooAuth:
      configs:
      - oauth2:
          accessTokenValidation:
            jwt:
              localJwks:
                inlineString: >-
                  $KEYCLOAK_CERT_KEYS
EOF
  

Step 5: Verify the OAuth policy link

1. Verify that the external auth policy is applied successfully.

   1. Review the status of the external auth policy and make sure that it shows ACCEPTED.

        kubectl get extauthpolicy -n gloo-mesh -o yaml
        

   2. Get the authconfig resource that was created for your policy and make sure that it shows ACCEPTED.

        kubectl get authconfig -n gloo-mesh -o yaml
        

      If you see a REJECTED error similar to invalid character 'k' looking for beginning of object key string, try copying the $KEYCLOAK_CERT_KEYS value manually again.

2. Copy the output of the following command and open the path in your web browser to access the httpbin app. You are redirected to the authentication page from the Keycloak identity provider.

     echo "https://${INGRESS_GW_ADDRESS}:443/get"
     

3. Enter the user credentials from Keycloak, such as the following values from the demo setup.

   • Username: user1
   • Password: password

You are authenticated and returned back to the httpbin home page.

Cleanup link

1. Remove Keycloak from your cluster.

     kubectl delete namespace keycloak
     

2. Delete the resources that you created for the external auth policy.

     kubectl delete secret -n gloo-mesh oauth
   kubectl delete routetable -n httpbin httpbin
   kubectl delete extauthserver -n gloo-mesh ext-auth-server
   kubectl delete extauthpolicy -n gloo-mesh oauth-auth-code
   kubectl delete extauthpolicy -n gloo-mesh oauth-jwt-validation