What data gets stored

The portal server stores the following data in the backing database. For an example of how to check the data that gets stored, see Review data in Redis.

  • API keys that end users can use to authenticate to destinations and routes that are protected by an external auth policy that the external auth server enforces.

How the portal and external auth servers share backing storage

To use Gloo Portal, you must configure both the portal server and external auth service to use the same backing storage. Review the following diagram for more information.

Portal and external auth shared backing database
Portal and external auth shared backing database

  1. As the portal admin, you configure the backing storage instance for both the external auth and portal servers. For more information, see Backing storage options.
  2. As an end user, you use the developer portal to generate an API key. Then, the Gloo portal server writes this API key to the shared backing storage database, such as Redis.
  3. As an end user, you include the API key in subsequent requests to the API products that you want to access. The Gloo ingress gateway receives your requests and checks the API’s route for external auth policies. The Gloo external auth server reads the API key value from the shared backing storage database, such as Redis. If the API key matches a valid value, then the Gloo gateway sends the request to the API product and you get back a successful response.

For steps to try out this process yourself, see Verify that external auth works with API keys in a backing storage database.

Backing storage options

Review the following options for setting up backing storage with Redis®* 1 instances.

OptionUse caseBenefitsDrawbacks
Default (no backing storage)Local testing in single clusters
  • Easy setup, no maintenance required
  • Updatable via Gloo Platform Helm chart
  • Data is not stored anywhere by default
  • No support for external auth policies until a backing storage is configured (e.g. Kubernetes secrets)
  • Manual creation, error-prone
  • Not scalable, highly available, or recoverable
Built-in local RedisProof of concept and staging environments in single clusters
  • The Redis instance is deployed for you as part of the default Gloo Mesh Gateway installation
  • Fast read/write speed as the instance is local to the management server
  • Updatable via Gloo Platform Helm chart
  • Redis GUI- and CLI-based tools help you monitor data
  • Only as highly available as your cluster setup
  • Has the same disaster recovery as your cluster setup
  • Might not meet your organization’s compliance requirements
Bring your own RedisProduction-level, multicluster environments
  • Enhanced high availability and disaster recovery (HA/DR)
  • Service level agreement (SLA) from your provider
  • Meet your organization’s compliance requirements
  • Redis GUI- and CLI-based tools help you monitor data
  • More complicated setup
  • Not covered by Solo support (contact your external Redis provider)

Shared or separate instances

In Gloo Mesh Gateway, many components use Redis to store data. Several of these components must share the same instance in order to function properly, as follows:

  • Management server, UI, and insights engine (which is also used as part of the OTel pipeline).
  • External auth service and developer portal server.
  • Rate limiter, which is often shared with the external auth service and portal server, but does not have to be.

If you enable the default, Solo-provided, local Redis options, these Redis instances are created separately.

If you bring your own Redis, you can choose to share the Redis instances or not. For internal compliance or security purposes, you might want separate Redis instances for each of these use cases. As such, the following guide assumes a separate deployment, and uses separate secrets. However, you can also share a single external Redis instance and update the names accordingly.

Default (no backing storage)

By default, no backing storage is configured for the portal server. For testing purposes, you can manually create backing storage, such as saving an API key’s details in a Kubernetes secret. For example steps, see Require API key external auth for Gloo Portal.

Built-in local Redis

When you install Gloo Platform, a local Redis instance redis is set up in the gloo-mesh namespace of the workload cluster. The rate limiting server automatically reads and writes to this Redis instance. However, you must manually configure the Gloo external auth and Gloo portal servers to read from and write data to this Redis instance.

  1. Include the same local Redis settings for the external auth and portal servers when you install or upgrade Gloo Platform. Review the following table to understand the matching settings. For more information, check the Helm reference.

    extAuthService.extAuth settingglooPortalServer settingDescription
    apiKeyStorage.name and apiKeyStorage.enabledapiKeyStorage.redis.enabledUse Redis as the backing storage for API keys.
    apiKeyStorage.secretKeyapiKeyStorage.secretKeyThe string value that you want to use to hash API keys before they are stored in the Redis database.
    N/AapiKeyStorage.configPathThe path to the Redis configuration file.
    apiKeyStorage.config.hostapiKeyStorage.redis.addressThe host that the Redis instance is available on. When using the built-in local Redis, this value is set to the local redis service in the gloo-mesh namespace: redis.gloo-mesh:6379.
      helm upgrade --install gloo-agent-addons gloo-platform/gloo-platform \
   --namespace gloo-mesh \
   --create-namespace \
   --version $GLOO_VERSION \
   --set common.cluster=$CLUSTER_NAME \
   --set extAuthService.enabled=true \
   --set rateLimiter.enabled=true \
   --set glooPortalServer.enabled=true \
   --set glooPortalServer.apiKeyStorage.redis.enabled=true \
   --set glooPortalServer.apiKeyStorage.secretKey="ThisIsSecret" \
   --set glooPortalServer.apiKeyStorage.configPath="/etc/redis-client-config/config.yaml" \
   --set glooPortalServer.apiKeyStorage.redis.address="redis.gloo-mesh:6379" \
   --set extAuthService.extAuth.apiKeyStorage.name=redis \
   --set extAuthService.extAuth.apiKeyStorage.enabled=true \
   --set extAuthService.extAuth.apiKeyStorage.config.host="redis.gloo-mesh:6379" \
   --set extAuthService.extAuth.apiKeyStorage.config.db=0 \
   --set extAuthService.extAuth.apiKeyStorage.secretKey="ThisIsSecret"

    If you use a Helm values file, make sure that the following settings are enabled.

      extAuthService:
  enabled: true
  extAuth:
    apiKeyStorage:
      # Use the local gloo-mesh Redis for backing storage
      name: redis
      enabled: true
      config:
        host: "redis.gloo-mesh:6379"
      # Replace with a random string to use to generate hash values for other keys
      secretKey: "ThisIsSecret"
      # Optionally enable authentication for Redis with the username and password in the referenced secret.
      redis:
        auth:
          enabled: true
          secretName: extauth-redis-auth-secret
glooPortalServer:
  enabled: true
  apiKeyStorage:
    # Use the local gloo-mesh Redis for backing storage
    redis:
      enabled: true
      address: redis.gloo-mesh:6379
      # Optionally enable authentication for Redis with the username and password in the referenced secret.
      auth:
        enabled: true
        secretName: portal-redis-auth-secret
    # Path for API key storage config file in the gloo-mesh backing Redis
    configPath: /etc/redis-client-config/config.yaml
    # Replace with a random string to use to generate hash values for other keys
    secretKey: "ThisIsSecret"
rateLimiter:
  enabled: true
# Configuration for the managed north-south (ingress) gateway. Requires a Gloo Mesh Gateway license.
northSouthGateways:
- # Install the gateway in the cluster.
  enabled: true

  2. Continue with the single-cluster or multicluster install guides, or the upgrade guide for more instructions to finish your installation or upgrade.

Bring your own Redis

Instead of using the built-in local Redis instance, you can achieve higher availability, disaster recovery, and enhanced control and security by bringing your own Redis cluster.

When you install Gloo Mesh Gateway, you can choose to use add-ons such as rate limiter, external auth, or portal (for Gloo Mesh Gateway). These add-ons often share the same backing Redis instance. Even if you want to use the same Redis instance for all of these add-ons, you must configure the Redis details for each add-on separately in the Helm installation. This guide shows how to configure the details for the external auth service and portal server.

Step 1: Choose a Redis provider

You can choose between a local or externally hosted Redis instance.

  • For a local instance: Install the Redis instance in the same cluster as the component that the Redis backs. For example, for the Gloo management server, install the Redis instance in the management cluster. For an add-on, install the Redis instance in the same workload as the rate limiter, external auth service, or portal server.
  • For an external cloud instance: Create an instance outside your cluster environment, such as Redis Enterprise or a cloud provider service like AWS ElastiCache.

Step 2: Configure your Redis instance

To create or use an existing Redis instance, make sure that you can connect to your Redis instance from the Gloo management cluster. These steps can vary by provider, but the following guidelines are common.

  • Local instances: The Gloo management server and Redis instances must be able to communicate. For example, you might deploy them in the same Kubernetes namespace.
  • Cloud instances: Often, you must configure networking settings such as the following:
    • Create the Kubernetes cluster and the Redis instance in the same virtual private network (VPC).
    • Create the Kubernetes cluster and the Redis instance in the same security group.
    • Make sure that the security group allows inbound and outbound connections between the cluster and Redis instance.
    • If the cluster is behind a firewall, you might need to add the public IP address of the Redis cluster to your allowlist.
  • Provider-specific considerations: Continue reading for requirements per Cloud provider.

AWS ElastiCache

When setting up your AWS ElastiCache instance, consider the following deployment options:

  • Use a high availability (HA) setup consisting of at least 1 primary and 1 replica instance.
  • Use non-clustered mode. Cluster mode is currently not supported.
  • Set up multiple availability zones (multi-AZ) with auto-failover enabled.
  • Set the maxmemory-policy directive to noeviction. For more information about eviction policies, see the Redis docs.
  • Use node types with TLS Offloading and Enhanced I/O Multiplexing.
  • Although optional, enabling TLS is recommended.
  • Monitor performance metrics including CPU utilization, memory usage, network throughput, and cache hit ratio.
  • Based on the size of your environment, increase the type of node instances. For more information, see Size and memory system requirements.

Step 3: Get your Gloo environment details

You can configure Redis during an initial installation or by performing an upgrade. Either way, you can configure the Redis details in your Helm values file.

Installation

If you have not installed Gloo Mesh Gateway yet, prepare details for your installation.

  1. Decide the Helm release namespace to use. The example uses the names suggested throughout the documentation, gloo-platform and gloo-mesh.

      export GLOO_MESH_RELEASE_NAMESPACE=gloo-mesh

  2. Create a Helm values file for your installation, such as gloo-single.yaml for a single cluster or mgmt-plane.yaml and data-plane.yaml for a multicluster environment.

Upgrade

If you are upgrading Gloo Mesh Gateway to set up Redis, get the details of your installation.

  1. Save the details of your Gloo Mesh Gateway installation, including the Helm chart namespace for the component that you want to set up the Redis instance for. In the following example, the release name is gloo-platform and the namespace is gloo-mesh, but you can update your values accordingly.

      export GLOO_MESH_RELEASE_NAMESPACE=gloo-mesh

    To get the values for your own release, run the following Helm command.

      helm list --all-namespaces
  
      NAME                 	NAMESPACE       	REVISION	UPDATED                             	STATUS  	CHART
gloo-platform        	gloo-mesh       	1      	  2023-09-01 13:26:56.061102 -0400 EDT	deployed	gloo-platform-2.5.12

  2. Get your Gloo Platform Helm values file. For more information, see Upgrade guide.

    • Single cluster:

        helm get values gloo-platform -o yaml -n gloo-mesh > gloo-single.yaml
open gloo-single.yaml

    • Multicluster:

        helm get values gloo-platform -n gloo-mesh -o yaml --kube-context $MGMT_CONTEXT > mgmt-plane.yaml
open mgmt-plane.yaml
  
        helm get values gloo-platform -n gloo-mesh -o yaml --kube-context $REMOTE_CONTEXT > data-plane.yaml
open data-plane.yaml

Step 4: Set up Redis authentication

Choose how to authenticate with your Redis cluster. Depending on your Redis provider, you might be required to use a specific authentication method, such as TLS certificates or a username and password.

TLS-encryption

For TLS-encrypted communication with Redis, the steps vary by provider.

  1. Enable TLS encryption for your Redis instance.

    • For local instances, you might create your own certificates such as with openssl or cert-manager to make the public Certificate Authority (CA) certificate, ca.crt. Then, you create a secret with this CA certificate so that the Gloo client can establish trust for the TLS connection to the Redis server instance. Note that server-side credentials for a mutual TLS (mTLS) connection are currently not supported.
    • For cloud instances, the provider often manages the certificates for you. For example, AWS ElastiCache encrypts in-transit communication with their own public CA. Note: Most up-to-date apps include CA certificates that trust the AWS CA by default. However, if after setup, you notice timeouts and SSL_connect failed: certificate verify failed messages in the logs, your app might not have the CA certificates. Depending on your app, you can update the CA certificates such as by logging into the pod and running update-ca-certificates. For an example, see the Bring your own Redis deployment example in the verification guide.

  2. For local instances: Create a Kubernetes secret to store the TLS credentials in the same namespace as the add-on. Run the following command from the local directory where your TLS certificates and key were created. Update the filenames of the certificates as necessary. Note: If you do not have certificates, such as if you use a cloud provider like AWS ElastiCache, skip this step.

      kubectl apply -f - <<EOF
apiVersion: v1
kind: Secret
type: Opaque
metadata:
  name: "portal-redis-certs"
  namespace: $GLOO_MESH_RELEASE_NAMESPACE
  labels:
    app.kubernetes.io/managed-by: Helm
  annotations:
    meta.helm.sh/release-name: $GLOO_MESH_RELEASE_NAME
    meta.helm.sh/release-namespace: $GLOO_MESH_RELEASE_NAMESPACE
data:
  ca.crt: $(cat ca.crt | base64 | tr -d '\n')
EOF

  3. Prepare the redis.certs section of the Helm values file that you previously retrieved.

    For local instances, enable the redis.certs section for each add-on. Include the details of the secret that you previously created.

      
extAuthService:
  enabled: true
  extAuth:
    apiKeyStorage:
      name: redis
      enabled: true
      redis:
        certs:
          # Set certs to true to bring your own certs.
          enabled: true
          # Name of the Kubernetes secret that has the TLS certs.
          # The secret must be in the same namespace as the ext auth service.
          secretName: portal-redis-certs
          # The key name in the data section of the Kubernetes secret
          # that has the CA certificate.
          caCertKey: ca.crt
      # Enable using a TLS connection with the cloud Redis instance.
      config:
        socketType: tls
glooPortalServer:
  enabled: true
  apiKeyStorage:
    redis:
      certs:
        # Set certs to true to bring your own certs.
        enabled: true
        # Name of the Kubernetes secret that has the TLS certs.
        # The secret must be in the same namespace as the portal server.
        secretName: portal-redis-certs
        # The key name in the data section of the Kubernetes secret
        # that has the CA certificate.
        caCertKey: ca.crt

    For cloud instances like AWS ElastiCache that use a public CA, set up the Redis to use TLS encryption. Omit the secret name and CA cert key fields, because the cloud instances use a public CA.

      
extAuthService:
  enabled: true
  extAuth:
    apiKeyStorage:
      name: redis
      enabled: true
      redis:
        certs:
          # Enable TLS connections to the Redis instance.
          enabled: true
      # Enable using a TLS connection with the cloud Redis instance.
      config:
        socketType: tls
glooPortalServer:
  enabled: true
  apiKeyStorage:
    redis:
      certs:
        # Enable TLS connections to the Redis instance.
        enabled: true

Password authentication

For a username and password auth, complete the following steps.

  1. Enable password auth for your Redis instance.

  2. Save the following values as environment variables.

    • Username: If your Redis instance does not have a username, use default.
    • Password: Note the password string.
      export REDIS_UN=default
export REDIS_PW=<password>

  3. Create a Kubernetes secret to store the credentials in the same namespace as the add-on.

  kubectl apply -f- <<EOF
apiVersion: v1
kind: Secret
type: Opaque
metadata:
   name: portal-redis-credentials
   namespace: $GLOO_MESH_ADDONS_NAMESPACE
   labels:
     app.kubernetes.io/managed-by: Helm
   annotations:
     meta.helm.sh/release-name: $GLOO_MESH_RELEASE_NAME
     meta.helm.sh/release-namespace: $GLOO_MESH_ADDONS_NAMESPACE
stringData:
  #If Redis doesn't have an explicit username, specify ‘default’.
  username: "$REDIS_UN"
  password: "$REDIS_PW"
EOF

  1. Prepare the redis.auth section of the Helm values file that you previously retrieved.

      
extAuthService:
  enabled: true
  extAuth:
    apiKeyStorage:
      name: redis
      enabled: true
      redis:
        auth:
          # Enable authentication for Redis with the username and password in the referenced secret.
          enabled: true
          # The name of the secret in the same namespace as the add-on.
          secretName: portal-redis-credentials
          # The key name in the data section of the Kubernetes secret
          # that has the password.
          passwordKey: password
          # The key name in the data section of the Kubernetes secret
          # that has the username.
          usernameKey: username
glooPortalServer:
  enabled: true
  apiKeyStorage:
    redis:
      auth:
        # Enable authentication for Redis with the username and password in the referenced secret.
        enabled: true
        # The name of the secret in the same namespace as the add-on.
        # The secret must have the following name.
        secretName: portal-redis-credentials
        # The key name in the data section of the Kubernetes secret
        # that has the password.
        passwordKey: password
        # The key name in the data section of the Kubernetes secret
        # that has the username.
        usernameKey: username

Step 5: Configure other Redis settings

Complete the redis section of your Helm values file. For more settings, see the Helm reference.

  1. Enable the use of a Redis instance to store API keys for the external auth service and the portal server.

      
extAuthService:
  enabled: true
  extAuth:
    apiKeyStorage:
      name: redis
      enabled: true
glooPortalServer:
  apiKeyStorage:
    redis:
      enabled: true

  2. Configure a secret key to use to hash the API keys before they are stored in the backing Redis instance. The following example uses ThisIsSecret, but you can provide your own string value.

      
extAuthService:
  extAuth:
    apiKeyStorage:
      # Replace with a random string to use to generate hash values for API keys.
      secretKey: "ThisIsSecret"
glooPortalServer:
  apiKeyStorage:
    redis:
    # Replace with the same random string to use to generate hash values for API keys.
    secretKey: "ThisIsSecret"

  3. Include the address to use to connect to your Redis cluster.

    • For local instances, this value is typically the Kubernetes service name that the add-on can access, such as gloo-mesh-redis.gloo-mesh.
    • For a cloud instance, this value is typically the primary endpoint, such as master.my-redis-name.cache.amazonaws.com for AWS ElastiCache or 10.xxx.xx.xx for Google Cloud Memorystore.
    • Include the port, which defaults to 6379.
      
extAuthService:
  extAuth:
    apiKeyStorage:
      config:
        host: "master.my-redis-name.cache.amazonaws.com:6379"
glooPortalServer:
  apiKeyStorage:
    redis:
      address: "master.my-redis-name.cache.amazonaws.com:6379"

  4. Optionally configure other settings. For more information and possible settings, see the Helm reference docs.

Step 6: Upgrade the Helm installation

Continue with the Upgrade guide to reinstall Gloo Mesh Gateway with your own Redis instance. Include the Helm values file that you prepared in the previous steps.

The following example Helm values file shows a basic installation with the external auth service and portal server sections filled out for an AWS ElastiCache Redis instance that uses TLS and auth.

  
extAuthService:
  enabled: true
  extAuth:
    apiKeyStorage:
      name: redis
      enabled: true
      config:
        host: "master.my-redis-name.cache.amazonaws.com:6379"
        db: 0
      redis:
        # Enable authentication for Redis with the username and password in the referenced secret.
        auth:
          enabled: true
          secretName: portal-redis-credentials
        # Enable TLS connections to the Redis instance.
        certs:
          enabled: true
      # Enable using a TLS connection with the cloud Redis instance.
      config:
        socketType: tls      
      # Replace with a random string to use to generate hash values for API keys.
      secretKey: "ThisIsSecret"
glooPortalServer:
  enabled: true
  apiKeyStorage:
    redis:
      enabled: true
      address: "master.my-redis-name.cache.amazonaws.com:6379"
      # Enable authentication for Redis with the username and password in the referenced secret.
      auth:
        enabled: true
        # The secret must have the following secret name.
        secretName: portal-redis-credentials
      # Enable TLS connections to the Redis instance.
      certs:
        enabled: true
    # Replace with a random string to use to generate hash values for API keys.
    secretKey: "ThisIsSecret"

Verify the connection

To verify the connection, make sure that the external auth service and portal server are configured to use the same Redis instance. Then, verify the connection to the Redis instance.

Verify the Redis configuration of the add-ons

Verify that the external auth and portal server add-ons are configured to use the same Redis instance.

  1. Verify that any necessary secrets are created.

      kubectl get secrets -n gloo-mesh

    Example output:

      NAME                                      TYPE                    DATA   AGE
ext-auth-service-api-key-secret-key       Opaque                  1      47s
ext-auth-service-api-key-storage          Opaque                  1      47s
ext-auth-service-signing-key              Opaque                  1      47s
portal-storage-config                     Opaque                  1      47s
portal-redis-certs                        Opaque                  1      47s
portal-redis-credentials                  Opaque                  1      47s

  2. Log in to the portal server and external auth service pods, and verify that the host information is stored along the config path that you set.

    1. Log in to the portal server pod.
        kubectl exec -it -n gloo-mesh pods/$(kubectl get pod -l app=gloo-mesh-portal-server -A -o jsonpath='{.items[0].metadata.name}') -- /bin/sh
    2. Check the file contents at the config path that you set, such as /etc/redis-client-config/config.yaml.
        cat /etc/redis-client-config/config.yaml
    3. Confirm that the value matches the host address for your Redis instance ($REDIS_HOST).
    4. To log out of the pod, enter exit.
    1. Log in to the external auth service pod.
        kubectl exec -it -n gloo-mesh pods/$(kubectl get pod -l app=ext-auth-service -A -o jsonpath='{.items[0].metadata.name}') -- /bin/sh
    2. Check the file contents at the config path that you set, such as /etc/apikeys/storage-config.yaml.
        cat /etc/apikeys/storage-config.yaml
    3. Confirm that the value matches the host address for your Redis instance ($REDIS_HOST).
    4. To log out of the pod, enter exit.

Verify the Redis connection

To review the data that is stored in Redis, you can connect to the local Redis instance. If you bring your own Redis, you must use those connection values. For more information, see your Redis provider docs, such as Amazon ElastiCache or Google Cloud Memorystore.

Choose between using the Redis CLI or RedisInsights.

Redis CLI

You can use the Redis CLI that is built into your deployment to review the data in your database.

  1. Install Redis in your cluster so that you can use the redis-cli to connect to your Redis instance.

    When you install Gloo Mesh Gateway with the default settings, Redis is installed in the cluster for you. You can skip this step.

    To connect to your own local Redis instance, make sure to get its details, such as my-redis in a redis namespace, as well as any authentication details.

    To connect your own external Redis in a cloud instance, such as AWS ElastiCache:

    1. Deploy the Redis CLI, such as with the following simple deployment. For more information, see the Redis docs.

        kubectl apply -f - <<EOF
apiVersion: apps/v1
kind: Deployment
metadata:
  name: redis-cli
  labels:
    app: redis-cli
spec:
  replicas: 1
  selector:
    matchLabels:
      app: redis-cli
  template:
    metadata:
      labels:
        app: redis-cli
    spec:
      containers:
      - name: redis-cli
        image: redis:latest
        command: ["sleep", "infinity"]  # Keeps the container running indefinitely
EOF

    2. Verify that you can access the Redis pod by logging into the pod.

        kubectl exec -it deploy/redis-cli -- /bin/sh

    3. Optional: For TLS connections that use a public CA, such as for AWS ElastiCache, make sure that the Redis CA certificates are up to date.

         apt-get install ca-certificates

    4. Verify that the CA certificates are installed.

        ls /etc/ssl/certs

      Example truncated output:

        002c0b4f.0
02265526.0
...
Amazon_Root_CA_1.pem
Amazon_Root_CA_2.pem
Amazon_Root_CA_3.pem
Amazon_Root_CA_4.pem
...

  2. From your terminal, log in to the Redis pod and open a Redis CLI shell.

    You can open a Redis CLI shell session by logging in to the Redis instance in the gloo-mesh namespace, such as gloo-mesh-redis which backs the Gloo management server and UI.

      kubectl exec -n gloo-mesh deploy/gloo-mesh-redis -it -- redis-cli

    You can open a Redis CLI shell session by logging in to the Redis instance in the add-ons namespace, such as redis in the gloo-mesh namespace, which backs the rate limiter, external auth, or portal server add-ons.

      kubectl exec -n gloo-mesh deploy/redis -it -- redis-cli

    You can open a Redis CLI shell session by logging into the Redis pod with the details that you got in the previous step. Include the --tls flag if your Redis instance enforces a TLS connection. Include the -a flag with your password if your Redis instance enforces auth.

      kubectl exec -n redis deploy/my-redis -it -- redis-cli --tls -a 'my-password'

    You can open a Redis CLI shell session by logging into the redis-cli pod that you deployed in the previous step. Update the host with your cloud instance details. Include the --tls flag if your Redis instance enforces a TLS connection. Include the -a flag with your password if your Redis instance enforces auth.

      kubectl exec -n default deploy/redis-cli -it -- redis-cli -h master.<my-redis>.abcdefg.use2.cache.amazonaws.com --tls -a 'my-password' -p 6379

  3. Run Redis CLI commands, such as monitor or keys. For more information, see the Redis docs.

    Example response of data populated by the management server:

      keys *
1) "$CLUSTER_NAME~apps~v1~Deployment"
2) "reports#$CLUSTER_NAME#httpbin#$CLUSTER_NAME"
3) "$CLUSTER_NAME~install.istio.io~v1alpha1~IstioOperator"
4) "reports#$CLUSTER_NAME#gloo-mesh#globalcccfde00-e4a9-4867-b6c0-5df8601f6e1e"
5) "$CLUSTER_NAME~admissionregistration.k8s.io~v1~MutatingWebhookConfiguration"
6) "reports#idx"
7) "reports#$CLUSTER_NAME#store#$CLUSTER_NAME"
8) "gloo.mesh.key.set"

    Example response of rate limit counters:

      monitor
OK
1681223733.198361 [0 10.xxx.x.x:xxxxx] "INCRBY" "tree|solo.io|generic_key^gloo-mesh.rl-server-config-gloo-mesh-$CLUSTER_NAME-rate-limiter|generic_key^counter|1718236800" "1"

    Example response of API keys for the external auth service and portal server add-ons. Note that the API key name and value are hashed based on the apiKeyStorage.secretKey that you configured when setting up the add-ons.

      keys *
1) "1bbe3f25-5a2a-4797-8ac0-d59c7480377a"
2) "abcmHk2Iwcy3VL+NNswyrs3B4YIEx39BG84jzwcoWB8="

get "1bbe3f25-5a2a-4797-8ac0-d59c7480377a"
"xksmHk2Iwcy3VL+NNswyrs3B4YIEx39BG84jzwcoWB8="

get "abcmHk2Iwcy3VL+NNswyrs3B4YIEx39BG84jzwcoWB8="
"{\"api_key\":\"abcmHk2Iwcy3VL+NNswyrs3B4YIEx39BG84jzwcoWB8=\",\"labels\":[\"first.last@example.com\"],\"metadata\":{\"config_id\":\"gloo-mesh.api-key-auth-default-cluster-name-mgt-ext-auth-service\",\"created-ts-unix\":\"1718742070\",\"name\":\"gold-api-key-name\",\"usagePlan\":\"gold\",\"username\":\"first.last@example.com\"},\"uuid\":\"1bbe3f25-5a2a-4797-8ac0-d59c7480377a\"}"

RedisInsights

RedisInsights is a desktop application that you can install for UI- and CLI-based interactions. For more information, see the Redis docs.

  1. Install RedisInsights. The steps vary depending on where you want to install the app.
  2. Enable port forwarding on the Redis deployment. Update the namespace and deployment to match the Redis instance in your cluster.
      kubectl port-forward -n gloo-mesh deploy/gloo-mesh-redis 6379
  3. Launch the RedisInsights app.
  4. Click + Add Redis Database and enter in your localhost and port details, which by default are 127.0.0.1:6379.
  5. Click the database that you just added.
  6. Use the UI or CLI to explore the data. For example, you can click the Browser tab (the key icon) and toggle the Key view to explore all of the keys in the database instance, as shown in the following screenshot.

RedisInsights view of all keys in the database
RedisInsights view of all keys in the database

  1. * Redis is a registered trademark of Redis Ltd. Any rights therein are reserved to Redis Ltd. Any use by Solo.io, Inc. is for referential purposes only and does not indicate any sponsorship, endorsement or affiliation between Redis and Solo.io. ↩︎