Deploy Gloo-managed service meshes

By using Gloo-managed service meshes, you no longer need to manually install and manage the istiod control plane. Instead, you provide the Istio configuration in a Gloo custom resource (CR), and Gloo translates this configuration into managed istiod control plane and gateways in each workload cluster for you.

Before you begin link

1. Follow the get started or advanced installation guide to install the Gloo Mesh Enterprise components.

2. Review the following considerations for using the Istio lifecycle manager.

   • Throughout this guide, you use example configuration files that have pre-filled values. You can update some of the values, but unexpected behaviors might occur. For example, if you change the default istio-ingressgateway name, you cannot also use Kubernetes horizontal pod autoscaling. For more information, see the Troubleshooting docs.
   • If you plan to run multiple revisions of Istio in your cluster and use discoverySelectors in each revision to discover the resources in specific namespaces, enable the glooMgmtServer.extraEnvs.IGNORE_REVISIONS_FOR_VIRTUAL_DESTINATION_TRANSLATION environment variable on the Gloo management server. For more information, see Multiple Istio revisions in the same cluster.
   • If your organization restricts elevated Kubernetes RBAC permissions for security reasons, you might need to install the Istio CNI plug-in. The OpenShift steps provide an example. For more information, see the Istio docs.

3. Review Supported versions to choose the Solo distribution of Istio that you want to use, and save the version information in the following environment variables.

   • REPO: The repo key for the Solo distribution of Istio that you can get by logging in to the Support Center and reviewing the Istio images built by Solo.io support article.
   • ISTIO_IMAGE: The version that you want to use with the solo tag, such as 1.20.8-patch1-solo. You can optionally append other tags of Solo distributions of Istio as needed.
   • REVISION: Take the Istio major and minor versions and replace the periods with hyphens, such as 1-20.
   info

   For testing environments only, you can deploy a revisionless installation. Revisionless installations permit in-place upgrades, which are quicker than the canary-based upgrades that revisioned installations require. To omit a revision, do not set a revision environment variable. Then in the following sections, you edit the sample IstioLifecycleManager and GatewayLifecycleManager files that you download to remove the revision and gatewayRevision fields. Note that if you deploy multiple Istio installations in the same cluster, only one installation can be revisionless.

     export REPO=<repo-key>
   export ISTIO_IMAGE=1.20.8-patch1-solo
   export REVISION=1-20
     

Multicluster link

Use Gloo Mesh Enterprise to deploy and manage Istio service meshes in each workload cluster.

istiod control planes link

Prepare an IstioLifecycleManager CR to manage istiod control planes.

1. Set the names of your clusters from your infrastructure provider. If your clusters have different names, specify those names instead.

     export REMOTE_CLUSTER1=<cluster1>
   export REMOTE_CLUSTER2=<cluster2>
   ...
     

2. Save the kubeconfig contexts for your clusters. Run kubectl config get-contexts, look for your cluster in the CLUSTER column, and get the context name in the NAME column. Note: Do not use context names with underscores. The generated certificate that connects workload clusters to the management cluster uses the context name as a SAN specification, and underscores in SAN are not FQDN compliant. You can rename a context by running kubectl config rename-context "<oldcontext>" <newcontext>.

     export MGMT_CONTEXT=<management-cluster-context>
   export REMOTE_CONTEXT1=<remote-cluster1-context>
   export REMOTE_CONTEXT2=<remote-cluster2-context>
   ...
     

3. Download the example file, istiod.yaml, which contains a basic IstioLifecycleManager configuration for the control plane.

     curl -0L https://raw.githubusercontent.com/solo-io/gloo-mesh-use-cases/main/gloo-mesh/istio-install/gm-managed/gm-istiod.yaml > istiod.yaml
     

   1. Elevate the permissions of the following service accounts that will be created. These permissions allow the Istio sidecarsgateways to make use of a user ID that is normally restricted by OpenShift. For more information, see the Istio on OpenShift documentation.

        oc adm policy add-scc-to-group anyuid system:serviceaccounts:istio-system --context $REMOTE_CONTEXT1
      oc adm policy add-scc-to-group anyuid system:serviceaccounts:gloo-mesh-gateways --context $REMOTE_CONTEXT1
      # Update revision as needed
      oc adm policy add-scc-to-group anyuid system:serviceaccounts:gm-iop-1-20 --context $REMOTE_CONTEXT1
        

        oc adm policy add-scc-to-group anyuid system:serviceaccounts:istio-system --context $REMOTE_CONTEXT2
      oc adm policy add-scc-to-group anyuid system:serviceaccounts:gloo-mesh-gateways --context $REMOTE_CONTEXT2
      # Update revision as needed
      oc adm policy add-scc-to-group anyuid system:serviceaccounts:gm-iop-1-20 --context $REMOTE_CONTEXT2
        

   2. Create the gloo-mesh-gateways project, and create a NetworkAttachmentDefinition custom resource for the project.

        kubectl create ns gloo-mesh-gateways --context $REMOTE_CONTEXT1
      cat <<EOF | oc --context $REMOTE_CONTEXT1 -n gloo-mesh-gateways create -f -
      apiVersion: "k8s.cni.cncf.io/v1"
      kind: NetworkAttachmentDefinition
      metadata:
        name: istio-cni
      EOF
        

        kubectl create ns gloo-mesh-gateways --context $REMOTE_CONTEXT2
      cat <<EOF | oc --context $REMOTE_CONTEXT2 -n gloo-mesh-gateways create -f -
      apiVersion: "k8s.cni.cncf.io/v1"
      kind: NetworkAttachmentDefinition
      metadata:
        name: istio-cni
      EOF
        

   3. Download the example file.

        curl -0L https://raw.githubusercontent.com/solo-io/gloo-mesh-use-cases/main/gloo-mesh/istio-install/gm-managed/gm-istiod-openshift.yaml > istiod.yaml
        

4. Update the example file with the environment variables that you previously set. Save the updated file as istiod-values.yaml.

   • For example, you can run a terminal command to substitute values:

       envsubst < istiod.yaml > istiod-values.yaml
       

5. Verify that the configuration is correct. For example, in spec.installations.clusters, verify that entries exist for each workload cluster name. You can also further edit the file to provide your own details. For more information, see the API reference.

     open istiod-values.yaml
     

   check_circle

   For testing environments only, you can deploy a revisionless installation by removing the revision fields.

6. Apply the IstioLifecycleManager CR to your management cluster.

     kubectl apply -f istiod-values.yaml --context $MGMT_CONTEXT
     

7. In each workload cluster, verify that the Istio pods have a status of Running.

        kubectl get pods -n istio-system --context $REMOTE_CONTEXT1
      kubectl get pods -n istio-system --context $REMOTE_CONTEXT2
        

   Example output:

        NAME                            READY   STATUS    RESTARTS   AGE
      istiod-1-20-b65676555-g2vmr     1/1     Running   0          47s
      NAME                            READY   STATUS    RESTARTS   AGE
      istiod-1-20-7b96cb895-4nzv9     1/1     Running   0          43s
        

East-west gateways link

Prepare a GatewayLifecycleManager custom resource to manage the east-west gateways.

1. Download the example file, ew-gateway.yaml, which contains a basic GatewayLifecycleManager configuration for an east-west gateway.

     curl -0L https://raw.githubusercontent.com/solo-io/gloo-mesh-use-cases/main/gloo-mesh/istio-install/gm-managed/gm-ew-gateway.yaml > ew-gateway.yaml
     

2. Update the example file with the environment variables that you previously set. Save the updated file as ew-gateway-values.yaml.

   • For example, you can run a terminal command to substitute values:

       envsubst < ew-gateway.yaml > ew-gateway-values.yaml
       

3. Verify that the configuration is correct. You can also further edit the file to provide your own settings. For more information, see the API reference.

     open ew-gateway-values.yaml
     

   • For testing environments only, you can deploy a revisionless installation by removing the revision field.

4. Apply the GatewayLifecycleManager CR to your management cluster.

     kubectl apply -f ew-gateway-values.yaml --context $MGMT_CONTEXT
     

5. In each workload cluster, verify that the east-west gateway pod is running.

     kubectl get pods -n gloo-mesh-gateways --context $REMOTE_CONTEXT1
   kubectl get pods -n gloo-mesh-gateways --context $REMOTE_CONTEXT2
     

   Example output for one cluster:

     NAME                                    READY   STATUS    RESTARTS   AGE
   istio-eastwestgateway-665d46686f-nhh52  1/1     Running   0          106s
     

6. In each workload cluster, verify that the load balancer service has an external address.

     kubectl get svc -n gloo-mesh-gateways --context $REMOTE_CONTEXT1
   kubectl get svc -n gloo-mesh-gateways --context $REMOTE_CONTEXT2
     

   Example output for one cluster:

     NAME                       TYPE           CLUSTER-IP      EXTERNAL-IP   PORT(S)                                                                         AGE
   istio-eastwestgateway      LoadBalancer   10.96.252.49    <externalip>  15021:32378/TCP,80:30315/TCP,443:32186/TCP,31400:30313/TCP,15443:31632/TCP      2m2s
     

Optional: Ingress gateways link

If you want to allow traffic from outside the cluster to enter your mesh, create a GatewayLifecycleManager resource to deploy and manage an ingress gateway. The ingress gateway allows you to specify basic routing rules for how to match and forward incoming traffic to a workload in the mesh. However, to also apply policies, such as rate limits, external authentication, or a Web Application Firewall to the gateway, you must have a Gloo Mesh Gateway license. For more information about Gloo Mesh Gateway, see the docs. If you want a service mesh-only environment without ingress, you can skip this step.

1. Download the example file, ingress-gateway.yaml, which contains a basic GatewayLifecycleManager configuration for an ingress gateway.

     curl -0L https://raw.githubusercontent.com/solo-io/gloo-mesh-use-cases/main/gloo-mesh/istio-install/gm-managed/gm-ingress-gateway.yaml > ingress-gateway.yaml
     

2. Update the example file with the environment variables that you previously set. Save the updated file as ingress-gateway-values.yaml.

   • For example, you can run a terminal command to substitute values:

       envsubst < ingress-gateway.yaml > ingress-gateway-values.yaml
       

3. Verify that the configuration is correct. You can also further edit the file to provide your own settings. For more information, see the API reference.

     open ingress-gateway-values.yaml
     

   • You can add cloud provider-specific load balancer annotations to the istioOperatorSpec.components.ingressGateways.k8s section, such as the following AWS annotations:

               ...
               k8s:
                 service:
                   ...
                 serviceAnnotations:
                   service.beta.kubernetes.io/aws-load-balancer-backend-protocol: ssl
                   service.beta.kubernetes.io/aws-load-balancer-cross-zone-load-balancing-enabled: "true"
                   service.beta.kubernetes.io/aws-load-balancer-nlb-target-type: instance
                   service.beta.kubernetes.io/aws-load-balancer-scheme: internet-facing
                   service.beta.kubernetes.io/aws-load-balancer-ssl-cert: "arn:aws:acm:<cert>"
                   service.beta.kubernetes.io/aws-load-balancer-type: external
       

     For testing environments only, you can deploy a revisionless installation by removing the gatewayRevision field.

4. Apply the GatewayLifecycleManager CR to your management cluster.

     kubectl apply -f ingress-gateway-values.yaml --context $MGMT_CONTEXT
     

5. In each workload cluster, verify that the ingress gateway pod is running.

     kubectl get pods -n gloo-mesh-gateways --context $REMOTE_CONTEXT1
   kubectl get pods -n gloo-mesh-gateways --context $REMOTE_CONTEXT2
     

   Example output for one cluster:

     NAME                                    READY   STATUS    RESTARTS   AGE
   istio-ingressgateway-665d46686f-nhh52   1/1     Running   0          106s
     

6. In each workload cluster, verify that the load balancer service has an external address.

     kubectl get svc -n gloo-mesh-gateways --context $REMOTE_CONTEXT1
   kubectl get svc -n gloo-mesh-gateways --context $REMOTE_CONTEXT2
     

   Example output for one cluster:

     NAME                       TYPE           CLUSTER-IP      EXTERNAL-IP   PORT(S)                                                                         AGE
   istio-ingressgateway       LoadBalancer   10.96.252.49    <externalip>  15021:32378/TCP,80:30315/TCP,443:32186/TCP,31400:30313/TCP,15443:31632/TCP      2m2s
     

   info

   AWS clusters: For the Elastic Load Balancer (ELB) instance that is automatically created for you to back the ingress gateway service, verify that the health check shows a healthy state. Gloo Mesh Core configures the ingress gateway to listen on HTTPS port 15443. However, when the ELB is created, the first port that is defined in the Kubernetes service manifest is used to perform the health check. This port might be different from the port that Gloo configures. For your ELB health check to pass, you might need to configure the load balancer to run the health check on port 15443.

7. Optional for OpenShift: Expose the gateways by using OpenShift routes.

     oc -n gloo-mesh-gateways expose svc istio-ingressgateway --port=http2 --context $REMOTE_CONTEXT1
   oc -n gloo-mesh-gateways expose svc istio-ingressgateway --port=http2 --context $REMOTE_CONTEXT2
     

Optional: Egress gateways link

Optional: Prepare a GatewayLifecycleManager CR to deploy and manage egress gateways. For more information, see Block egress traffic with an egress gateway.

1. Download the example file, egress-gateway.yaml, which contains a basic GatewayLifecycleManager configuration for an egress gateway.

     curl -0L https://raw.githubusercontent.com/solo-io/gloo-mesh-use-cases/main/gloo-mesh/istio-install/gm-managed/gm-egress-gateway.yaml > egress-gateway.yaml
     

2. Update the example file with the environment variables that you previously set. Save the updated file as egress-gateway-values.yaml.

   • For example, you can run a terminal command to substitute values:

       envsubst < egress-gateway.yaml > egress-gateway-values.yaml
       

3. Verify that the configuration is correct. For example, in spec.installations.clusters, verify that entries exist for each workload cluster name. You can also further edit the file to provide your own settings. For more information, see the API reference.

     open egress-gateway-values.yaml
     

   check_circle

   For testing environments only, you can deploy a revisionless installation by removing the revision field.

4. Apply the GatewayLifecycleManager CR to your management cluster.

     kubectl apply -f egress-gateway-values.yaml --context $MGMT_CONTEXT
     

5. In each workload cluster, verify that the egress gateway pods are running.

     kubectl get pods -n gloo-mesh-gateways --context $REMOTE_CONTEXT1
   kubectl get pods -n gloo-mesh-gateways --context $REMOTE_CONTEXT2
     

   Example output for one cluster:

     NAME                                    READY   STATUS    RESTARTS   AGE
   istio-egressgateway-665d46686f-nhh52    1/1     Running   0          106s
     

6. In each workload cluster, verify that the load balancer service has an external address.

     kubectl get svc -n gloo-mesh-gateways --context $REMOTE_CONTEXT1
   kubectl get svc -n gloo-mesh-gateways --context $REMOTE_CONTEXT2
     

   Example output for one cluster:

     NAME                       TYPE           CLUSTER-IP      EXTERNAL-IP   PORT(S)                                                                         AGE
   istio-egressgateway        LoadBalancer   10.96.252.49    <externalip>  15021:32378/TCP,80:30315/TCP,443:32186/TCP,31400:30313/TCP,15443:31632/TCP      2m2s
     

Add services to the mesh link

Now that Istio is up and running, you can create service namespaces for your teams to run app workloads in. For any namespaces that you want to deploy apps to, be sure to follow these steps to include your services in the service mesh.

1. Label the namespace with the Istio revision so that Istio sidecars deploy to your app pods.

     export REVISION=$(kubectl get pod -L app=istiod -n istio-system --context $REMOTE_CONTEXT -o jsonpath='{.items[0].metadata.labels.istio\.io/rev}')
   kubectl label ns <namespace> istio.io/rev=$REVISION --overwrite --context $REMOTE_CONTEXT
     

   check_circle

   If you deployed revisionless installations in testing environments, you can instead label your workload namespaces with kubectl label ns istio-injection=enabled --context $REMOTE_CONTEXT.

2. If you already deployed app pods to the namespace, restart the workloads so that sidecars are injected into the pods. For example, you might roll out a restart to each deployment by using a command similar to the following.

     kubectl rollout restart deployment -n <namespace> <deployment> --context $REMOTE_CONTEXT
     

Single cluster link

Use Gloo Mesh Enterprise to install a managed service mesh that runs a hardened Solo distribution of Istio in your cluster.

istiod control plane link

Prepare an IstioLifecycleManager CR to manage the istiod control plane.

1. Save the name of your cluster as an environment variable.

     export CLUSTER_NAME=<cluster_name>
     

2. Download the example file, istiod.yaml, which contains a basic IstioLifecycleManager configuration for the control plane.

     curl -0L https://raw.githubusercontent.com/solo-io/gloo-mesh-use-cases/main/gloo-mesh/istio-install/gm-managed/single-cluster/gm-istiod.yaml > istiod.yaml
     

   1. Elevate the permissions of the following service accounts that will be created. These permissions allow the Istio sidecarsgateways to make use of a user ID that is normally restricted by OpenShift. For more information, see the Istio on OpenShift documentation.

        oc adm policy add-scc-to-group anyuid system:serviceaccounts:istio-system
      oc adm policy add-scc-to-group anyuid system:serviceaccounts:gloo-mesh-gateways
      # Update revision as needed
      oc adm policy add-scc-to-group anyuid system:serviceaccounts:gm-iop-1-20
        

   2. Elevate the permissions of the service account in each project where you want to deploy workloads. This permission allows the Istio sidecars to make use of a user ID that is normally restricted by OpenShift.

        oc adm policy add-scc-to-group anyuid system:serviceaccounts:<project>
        

   3. Create the gloo-mesh-gateways project, and create a NetworkAttachmentDefinition custom resource for the project.

        kubectl create ns gloo-mesh-gateways
      cat <<EOF | oc -n gloo-mesh-gateways create -f -
      apiVersion: "k8s.cni.cncf.io/v1"
      kind: NetworkAttachmentDefinition
      metadata:
        name: istio-cni
      EOF
        

   4. Create a NetworkAttachmentDefinition custom resource for each project where you want to deploy workloads.

        cat <<EOF | oc -n <project> create -f -
      apiVersion: "k8s.cni.cncf.io/v1"
      kind: NetworkAttachmentDefinition
      metadata:
        name: istio-cni
      EOF
        

   5. Download the example file.

        curl -0L https://raw.githubusercontent.com/solo-io/gloo-mesh-use-cases/main/gloo-mesh/istio-install/gm-managed/single-cluster/gm-istiod-openshift.yaml > istiod.yaml
        

3. Update the example file with the environment variables that you previously set. Save the updated file as istiod-values.yaml.

   • For example, you can run a terminal command to substitute values:

       envsubst < istiod.yaml > istiod-values.yaml
       

4. Verify that the configuration is correct. You can also further edit the file to provide your own details. For more information, see the API reference.

     open istiod-values.yaml
     

   check_circle

   For testing environments only, you can deploy a revisionless installation by removing the revision field.

5. Apply the IstioLifecycleManager CR to your cluster.

     kubectl apply -f istiod-values.yaml
     

6. Verify that the istiod pod has a status of Running.

        kubectl get pods -n istio-system
        

   Example output:

        NAME                            READY   STATUS    RESTARTS   AGE
      istiod-1-20-b65676555-g2vmr     1/1     Running   0          47s
        

Optional: Ingress gateway link

If you want to allow traffic from outside the cluster to enter your mesh, create a GatewayLifecycleManager resource to deploy and manage an ingress gateway. The ingress gateway allows you to specify basic routing rules for how to match and forward incoming traffic to a workload in the mesh. However, to also apply policies, such as rate limits, external authentication, or a Web Application Firewall to the gateway, you must have a Gloo Mesh Gateway license. For more information about Gloo Mesh Gateway, see the docs. If you want a service mesh-only environment without ingress, you can skip this step.

1. Download the example file, ingress-gateway.yaml, which contains a basic GatewayLifecycleManager configuration for an ingress gateway.

     curl -0L https://raw.githubusercontent.com/solo-io/gloo-mesh-use-cases/main/gloo-mesh/istio-install/gm-managed/single-cluster/gm-ingress-gateway.yaml > ingress-gateway.yaml
     

2. Update the example file with the environment variables that you previously set. Save the updated file as ingress-gateway-values.yaml.

   • For example, you can run a terminal command to substitute values:

       envsubst < ingress-gateway.yaml > ingress-gateway-values.yaml
       

3. Verify that the configuration is correct. You can also further edit the file to provide your own settings. For more information, see the API reference.

     open ingress-gateway-values.yaml
     

   • You can add cloud provider-specific load balancer annotations to the istioOperatorSpec.components.ingressGateways.k8s section, such as the following AWS annotations:

               ...
               k8s:
                 service:
                   ...
                 serviceAnnotations:
                   service.beta.kubernetes.io/aws-load-balancer-backend-protocol: ssl
                   service.beta.kubernetes.io/aws-load-balancer-cross-zone-load-balancing-enabled: "true"
                   service.beta.kubernetes.io/aws-load-balancer-nlb-target-type: instance
                   service.beta.kubernetes.io/aws-load-balancer-scheme: internet-facing
                   service.beta.kubernetes.io/aws-load-balancer-ssl-cert: "arn:aws:acm:<cert>"
                   service.beta.kubernetes.io/aws-load-balancer-type: external
       

     For testing environments only, you can deploy a revisionless installation by removing the gatewayRevision field.

4. Apply the GatewayLifecycleManager CR to your cluster.

     kubectl apply -f ingress-gateway-values.yaml
     

5. Verify that the ingress gateway pod is running and that the load balancer service has an external address.

     kubectl get pods -n gloo-mesh-gateways
   kubectl get svc -n gloo-mesh-gateways
     

   Example output:

     NAME                                    READY   STATUS    RESTARTS   AGE
   istio-ingressgateway-665d46686f-nhh52   1/1     Running   0          106s
     

     NAME                        TYPE           CLUSTER-IP      EXTERNAL-IP   PORT(S)                                                                         AGE
   istio-ingressgateway        LoadBalancer   10.96.252.49    <externalip>  15021:32378/TCP,80:30315/TCP,443:32186/TCP,31400:30313/TCP,15443:31632/TCP      2m2s
     

   info

   AWS clusters: For the Elastic Load Balancer (ELB) instance that is automatically created for you to back the ingress gateway service, verify that the health check shows a healthy state. Gloo Mesh Core configures the ingress gateway to listen on HTTPS port 15443. However, when the ELB is created, the first port that is defined in the Kubernetes service manifest is used to perform the health check. This port might be different from the port that Gloo configures. For your ELB health check to pass, you might need to configure the load balancer to run the health check on port 15443.

6. Optional for OpenShift: Expose the ingress gateway by using an OpenShift route.

     oc -n gloo-mesh-gateways expose svc istio-ingressgateway --port=http2
     

Optional: Egress gateway link

Prepare a GatewayLifecycleManager resource to deploy and manage an egress gateway. For more information, see Block egress traffic with an egress gateway.

1. Download the example file, egress-gateway.yaml, which contains a basic GatewayLifecycleManager configuration for an egress gateway.

     curl -0L https://raw.githubusercontent.com/solo-io/gloo-mesh-use-cases/main/gloo-mesh/istio-install/gm-managed/single-cluster/gm-egress-gateway.yaml > egress-gateway.yaml
     

2. Update the example file with the environment variables that you previously set. Save the updated file as egress-gateway-values.yaml.

   • For example, you can run a terminal command to substitute values:

       envsubst < egress-gateway.yaml > egress-gateway-values.yaml
       

3. Verify that the configuration is correct. You can also further edit the file to replicate the settings in your existing Istio installation. For more information, see the API reference.

     open egress-gateway-values.yaml
     

   check_circle

   For testing environments only, you can deploy a revisionless installation by removing the revision field.

4. Apply the GatewayLifecycleManager resource to your cluster.

     kubectl apply -f egress-gateway-values.yaml
     

5. In the gloo-mesh-gateways namespace, verify that the egress gateway pod for the new revision is running and that the load balancer service has an external address.

     kubectl get pods -n gloo-mesh-gateways
   kubectl get svc -n gloo-mesh-gateways
     

   Example output for one cluster:

     NAME                                    READY   STATUS    RESTARTS   AGE
   istio-egressgateway-665d46686f-nhh52    1/1     Running   0          106s
     

     NAME                       TYPE           CLUSTER-IP      EXTERNAL-IP   PORT(S)                                                                         AGE
   istio-egressgateway        LoadBalancer   10.96.252.49    <externalip>  15021:32378/TCP,80:30315/TCP,443:32186/TCP,31400:30313/TCP,15443:31632/TCP      2m2s
     

   info

   AWS clusters: For the Elastic Load Balancer (ELB) instance that is automatically created for you to back the ingress gateway service, verify that the health check shows a healthy state. Gloo Mesh Core configures the ingress gateway to listen on HTTPS port 15443. However, when the ELB is created, the first port that is defined in the Kubernetes service manifest is used to perform the health check. This port might be different from the port that Gloo configures. For your ELB health check to pass, you might need to configure the load balancer to run the health check on port 15443.

Add services to the mesh link

Now that Istio is up and running, you can create service namespaces for your teams to run app workloads in. For any namespaces that you want to deploy apps to, be sure to follow these steps to include your services in the service mesh.

1. Label the namespace with the Istio revision so that Istio sidecars deploy to your app pods.

     export REVISION=$(kubectl get pod -L app=istiod -n istio-system -o jsonpath='{.items[0].metadata.labels.istio\.io/rev}')
   kubectl label ns <namespace> istio.io/rev=$REVISION --overwrite
     

   check_circle

   If you deployed revisionless installations in testing environments, you can instead label your workload namespaces with kubectl label ns istio-injection=enabled.

2. If you already deployed app pods to the namespace, restart the workloads so that sidecars are injected into the pods. For example, you might roll out a restart to each deployment by using a command similar to the following.

     kubectl rollout restart deployment -n <namespace> <deployment>
     

Next steps link

Now that you have Gloo Mesh Enterprise and Istio up and running, check out some of the following resources to learn more about Gloo Mesh Enterprise and expand your service mesh capabilities.

Istio:

• Find out more about hardened Istio n-4 version support built into Solo distributions of Istio.
• Review how Gloo Mesh Enterprise custom resources are automatically translated into Istio resources.
• Monitor and observe your Istio environment with Gloo Mesh Enterprise’s built-in telemetry tools.
• When it’s time to upgrade Istio, use Gloo Mesh Enterprise to upgrade managed Istio installations.

Help and support:

• Talk to an expert to get advice or build out a proof of concept.
• Join the #gloo-mesh channel in the Solo.io community slack.
• Try out one of the Gloo workshops.