Datadog

Datadog is a SaaS platform that allows you to easily collect metrics and events from your environment through integrations with solutions like Kubernetes, public cloud providers, Linux and more. In this guide, we will show you how Gloo Edge can work with the Datadog Kubernetes integration to deliver information from Envoy and other Gloo Edge components to Datadog for analysis.

Here are the high level steps for completing the integration:

1. Install Kubernetes and Envoy Integrations
2. Get the API key for Helm installation
3. Create and edit Datadog values file
4. Install Datadog using Helm
5. Update the gateway-proxy Deployment
6. Update the gateway-proxy ConfigMap
7. Validate using kubectl

Prerequisites

You will need the following to complete this guide:

• Datadog account: If you don’t already have an account, you can sign up for a free trial on their website.
• Kubernetes cluster: This can be deployed in any environment, follow our preparation guide for more information.
• Gloo Edge installation: You can install Gloo Edge on Kubernetes by following our setup guide.
• Helm: You will be deploying the Datadog integration using Helm v3.
• kubectl: Kubectl should be installed and configured to access the cluster where you are adding Datadog.

Once you have the prerequisites complete, you will need to get Datadog deployed on your Kubernetes cluster.

Prepare Datadog

Now that we’ve got all the prerequisites in place, there are a few things to do on the Datadog side to prepare for data collection. We need to enable the Kubernetes and Envoy integrations and get the API key for the Kubernetes installation.

Install Kubernetes and Envoy Integrations

From the Datadog portal, select Integrations. Then, install the Envoy and Kubernetes integrations.

If this is the first time you’ve logged into Datadog, you can also follow the wizard for enabling Kubernetes and Envoy.

Retrieve the API key

From the Datadog portal, select Integrations > Agents. Then, select the Kubernetes agent. In the directions, find the Helm command to install the Datadog agent on your cluster. Your API key is included in the sample command, similar to the following example.

helm install datadog-gloo -f datadog-values.yaml --set datadog.site='datadoghq.com' --set datadog.apiKey=YOUR_API_KEY --set datadog.prometheusScrape.enabled=true datadog/datadog 

Copy this command for later use.

Install Datadog using Helm

You can use Helm to install Datadog on your Kubernetes cluster. As part of the installation, you create a file to override the default values in the Helm chart.

Prepare the Datadog overrides file

Use the Datadog values.yaml configuration file as a starting point for your overrides file. For more information, see the Datadog docs.

Update two datadog.logs settings:

• enabled: true: Enables log collection by Datadog.
• containerCollectAll: true: Enables log collection across all containers.

cat << EOF >  datadog-values.yaml
datadog:
  logs:
    ## @param enabled - boolean - optional - default: false
    ## Enables this to activate Datadog Agent log collection.
    ## ref: https://docs.datadoghq.com/containers/kubernetes/log/
    #
    enabled: true

    ## @param containerCollectAll - boolean - optional - default: false
    ## Enable this to allow log collection for all containers.
    ## ref: https://docs.datadoghq.com/containers/kubernetes/log/
    #
    containerCollectAll: true
EOF

Now that the datadog-values.yaml file is ready, you can use Helm to deploy Datadog to your Kubernetes cluster.

Install Datadog with Helm

You will need to log into your Datadog account to retrieve the API keys for your installation. We retrieved them in an earlier step. You can find the example Helm command with your API keys on the Kubernetes integration page.

Since we already prepared our datadog-values.yaml file in the previous step, we can simply run the following Helm command against the target Kubernetes cluster. Be sure to change the YOUR_API_KEY value to the key found in the example command in your Datadog account.

helm install datadog-gloo -f datadog-values.yaml --set datadog.site='datadoghq.com' --set datadog.apiKey=YOUR_API_KEY --set datadog.prometheusScrape.enabled=true datadog/datadog 

You can validate that Datadog has installed by checking for the deployed pods.

kubectl get pods | grep datadog

datadog-gloo-6d7wk                                 1/1     Running   0          3m1s
datadog-gloo-cluster-agent-646f8f947d-sdm2z        1/1     Running   0          3m1s
datadog-gloo-j227x                                 1/1     Running   0          3m1s
datadog-gloo-kube-state-metrics-678b97d74f-w69jz   1/1     Running   0          3m1s
datadog-gloo-prn8j                                 1/1     Running   0          3m1s

The installation creates a DaemonSet for the Datadog agent, so there will be datadog-gloo pods for each worker node in your cluster, and separate pods for the cluster-agent and kube-state-metrics.

With Datadog installed, we now need to configure our Gloo Edge deployment to make Envoy metrics available to Datadog.

Configure the Gloo Edge deployment

In this section, we will show you how to modify the Envoy proxy itself (gateway-proxy deployment) to provide its metrics to Datadog. In addition, by enabling the prometheusScrape option in the Datadog agent installation, we expect to see control-plane-specific metrics emitted by other pods in the Gloo Edge fleet (e.g., gloo, discovery).

We will need to update two things to allow metrics collection from Datadog. In order to discover the Envoy pods, the Datadog agent is relying on an Autodiscovery feature that looks for specific annotations associated with Envoy pods.

The Envoy pods are configured by default to listen on port 8081 and the path /metrics. When a request comes in matching that path, it is rewritten to /stats/prometheus. Since we want to use Datadog instead, we are going to update that rule to rewrite the path to just /stats. If you’d like to use both Prometheus and Datadog, you could set up a matcher for a different path and rewrite it to /stats.

Updating the gateway-proxy annotations

First, we will publish metrics to Datadog for the Envoy proxy itself. To do this, we are going to edit the gateway-proxy deployment in Gloo Edge. We are going to add a series of Datadog-specific annotations that alert the agent that these pods are running Envoy. The annotations also let Datadog know what address to use for metrics collection and any log processing rules. The full list of potential annotations can be found in the Datadog documentation.

Assuming that you have deployed Gloo Edge in the namespace gloo-system, run the following command:

kubectl edit deployments -n gloo-system gateway-proxy

Then update the spec.template.metadata section of the yaml with these additional annotations. Be sure to add the annotations in the spec.template.metadata.annotations section, not the metadata.annotations section. Adding them to the wrong section will cause the annotations not to be propagated through to the gateway-proxy pod.

spec:
  template:
    metadata:
      annotations:
        ad.datadoghq.com/gateway-proxy.check_names: '["envoy"]'
        ad.datadoghq.com/gateway-proxy.init_configs: '[{}]'
        ad.datadoghq.com/gateway-proxy.instances: '[{"stats_url": "http://%%host%%:8081/metrics"}]'
        ad.datadoghq.com/gateway-proxy.logs: '[{"source": "envoy", "service": "gloo","log_processing_rules":
         [{"type": "multi_line", "name": "log_start_with_date","pattern" : "^\\[[0-9]{4}-[0-9]{2}-[0-9]{2}|{"}]}]'

These annotations can also be added declaratively via helm, for example if using Gloo Edge Enterprise, these annotations can be added as a value for gloo.gatewayProxies.gatewayProxy.podTemplate.extraAnnotations.

For more information about merging strategies, see the Helm documentation.

You can verify that the annotations have been successfully updated by running the following command:

kubectl get pods -n gloo-system -l gloo=gateway-proxy -o json | jq '.items | .[].metadata.annotations'

Updating the Envoy configuration

The configuration of the Envoy gateway-proxy is stored in a ConfigMap called gateway-proxy-envoy-config. We are going to update the ConfigMap to update the route on the Prometheus listeners.

Assuming that you have deployed Gloo Edge in the namespace gloo-system, run the following command:

kubectl edit configmap gateway-proxy-envoy-config -n gloo-system

Find the following section in the ConfigMap:

  route:
    prefix_rewrite: "/stats/prometheus"
    cluster: admin_port_cluster

And update it to the following:

  route:
    prefix_rewrite: "/stats" # instead of "/stats/prometheus"
    cluster: admin_port_cluster

Then save the change. The Envoy pod will update within a few seconds with the new configuration settings. Datadog should now be able to collect metrics from any Envoy pods using the /metrics path.

If you’d prefer to manage the route.prefix_rewrite setting from Helm rather than directly editing the ConfigMap, then use the value gatewayProxies.gatewayProxy.stats.routePrefixRewrite as documented here.

Validate the configuration

We can check that the Datadog agent has enabled Envoy metrics collection by running the agent status command against the daemonset pod that is on the same node as the gateway-proxy pod. First we can get the worker node in question by running:

NODE_NAME=$(kubectl get pods -n gloo-system -l gloo=gateway-proxy -o json | jq '.items | .[].spec.nodeName' -r)

Then we can get the DaemonSet pod for Datadog by running the following:

# Assumes that Datadog agent pods are running in the default namespace
POD_NAME=$(kubectl get pods -n default --field-selector spec.nodeName=$NODE_NAME --selector=app=datadog-gloo | tail -1 | cut -d' ' -f1)

Now you can run the agent status command from inside the Datadog agent pod:

kubectl exec $POD_NAME -- agent status | grep envoy

The output should be similar to this:

envoy (1.23.0)
      Instance ID: envoy:f312c8247060dc62 [OK]

That means the Datadog agent has fired up the Envoy integration and should be collecting metrics. You can verify this by going back to the Datadog portal and navigating to the Envoy Overview dashboard.

In addition, you should be able to see meaningful statistics on the Datadog Metrics Explorer.

You should also be able to see log messages emitted by various Gloo Edge components.

Summary

In this guide we showed you how to integrate Datadog with Gloo Edge and Envoy proxies. It’s important to remember that the changes made to the gateway-proxy ConfigMap and Deployment should also be updated in the Helm values file you use to deploy Gloo Edge. This is especially important if you are using Helm version 2, which does not gracefully handle out-of-band changes. It is also possible to configure these settings before Gloo Edge is installed by using a custom values file with the Helm installation.

The full list of Helm values is available in the docs. The value gatewayProxies.gatewayProxy.podTemplate.extraAnnotations.NAME can be updated to add the required annotations, and the value gatewayProxies.gatewayProxy.stats.routePrefixRewrite controls the route.prefix_rewrite above.