About policy inheritance

Policies that are defined in a RouteOption resource and that are applied to a parent HTTPRoute resource are automatically inherited by all the child or grandchild HTTPRoutes along the route delegation chain. The following rules apply:

  • Only policies that are specified in a RouteOption resource can be inherited by a child HTTPRoute. For inheritance to take effect, you must use the spec.targetRefs field in the RouteOption resource to apply the RouteOption resource to the parent HTTPRoute resource. Any child or grandchild HTTPRoute that the parent delegates traffic to inherits these policies.
  • Child RouteOption resources cannot override policies that are defined in a RouteOption resource that is applied to a parent HTTPRoute. If the child HTTPRoute sets a policy that is already defined on the parent HTTPRoute, the setting on the parent HTTPRoute takes precedence and the setting on the child is ignored. For example, if the parent HTTPRoute defines a data loss prevention policy, the child HTTPRoute cannot change these settings or disable that policy.
  • Child HTTPRoutes can augment the inherited settings by defining RouteOption fields that were not already set on the parent HTTPRoute.
  • Policies are inherited along the complete delegation chain, with parent policies having a higher priority than their respective children.

Configuration overview

In this guide you walk through a route delegation example where a child HTTPRoute inherits policies that are set on a parent HTTPRoute. In addition, the child HTTPRoute defines other policies that are only applied to the child HTTPRoute.

The following image illustrates the route delegation hierarchy and policy inheritance:

parent HTTPRoute:

  • The parent HTTPRoute resource delegates traffic as follows:
    • Requests to/anything/team1 are delegated to the child HTTPRoute resource child-team1 in namespace team1.
    • Requests to /anything/team2 are delegated to the child HTTPRoute resource child-team2 in namespace team2.
  • The response header test: bar is added to all requests to the routes that the parent HTTPRoute serves. This policy is defined in a RouteOption resource that is applied to the parent HTTPRoute by using the targetRefs field.

child-team1 HTTPRoute:

  • The child HTTPRoute resource child-team1 matches incoming traffic for the /anything/team1/foo prefix path and routes that traffic to the httpbin app in the team1 namespace.
  • The child-team1 resource inherits the response header policy from the parent HTTPRoute. In addition, a RouteOption resource that specifies a fault injection policy is attached to all child-team1 routes and aborts all incoming requests with a 418 HTTP response code.

child-team2 HTTPRoute:

  • The child HTTPRoute resource child-team2 delegates traffic on the /anything/team2/bar path to a grandchild HTTPRoute resource in the team2 namespace.
  • The child-team2 resource inherits the response header policy from the parent HTTPRoute. In addition, a RouteOption resource that specifies a prefix rewrite policy is attached to all child-team2 routes and rewrites prefix paths to /anything/rewrite.

grandchild HTTPRoute:

  • The grandchild HTTPRoute resource grandchild matches incoming traffic for the /anything/team2/bar/.* regex path and routes that traffic to the httpbin app in the team2 namespace.
  • The grandchild HTTPRoute inherits all policies from the parent and child-team2 HTTPRoute resources. Because of that, requests to the /anything/team2/bar/.* regex path are rewritten to /anything/rewrite. In addition, the test: bar header is added to all responses.

Before you begin

  1. Create the namespaces for team1 and team2.

      kubectl create namespace team1
kubectl create namespace team2

  2. Deploy the httpbin app into both namespaces.

      kubectl -n team1 apply -f https://raw.githubusercontent.com/solo-io/gloo-mesh-use-cases/main/policy-demo/httpbin.yaml
kubectl -n team2 apply -f https://raw.githubusercontent.com/solo-io/gloo-mesh-use-cases/main/policy-demo/httpbin.yaml

  3. Verify that the httpbin apps are up and running.

      kubectl get pods -n team1
kubectl get pods -n team2

    Example output:

      NAME                      READY   STATUS    RESTARTS   AGE
httpbin-f46cc8b9b-bzl9z   3/3     Running   0          7s
NAME                      READY   STATUS    RESTARTS   AGE
httpbin-f46cc8b9b-nhtmg   3/3     Running   0          6s

Setup

Set up a parent, child, grandchild route delegation example and explore how policies are inherited in the delegation chain.

  1. Create the parent HTTPRoute resource that matches incoming traffic on the delegation.example domain. The HTTPRoute resource specifies two routes:

    • /anything/team1: The routing decision is delegated to a child-team1 HTTPRoute resource in the team1 namespace.
    • /anything/team2: The routing decision is delegated to a child-team2 HTTPRoute resource in the team2 namespace.
      kubectl apply -f- <<EOF
apiVersion: gateway.networking.k8s.io/v1
kind: HTTPRoute
metadata:
 name: parent
 namespace: gloo-system
spec:
 parentRefs:
 - name: http
 hostnames:
  - "delegation.example"
 rules:
 - matches:
   - path:
       type: PathPrefix
       value: /anything/team1
   backendRefs:
   - group: gateway.networking.k8s.io
     kind: HTTPRoute
     name: "*"
     namespace: team1
 - matches:
   - path:
       type: PathPrefix
       value: /anything/team2
   backendRefs:
   - group: gateway.networking.k8s.io
     kind: HTTPRoute
     name: "*"
     namespace: team2
EOF

  2. Create a RouteOption resource that adds the test: bar header to the response and apply this policy to the parent HTTPRoute resource by using the spec.targetRef section.

      kubectl apply -f- <<EOF
apiVersion: gateway.solo.io/v1
kind: RouteOption
metadata:
 name: parent-remove-header
 namespace: gloo-system
spec:
 targetRefs:
 - group: gateway.networking.k8s.io
   kind: HTTPRoute
   name: parent
 options:
   headerManipulation:
     responseHeadersToAdd:
     - header:
         key: test
         value: bar
EOF

  3. Create the child-team1 HTTPRoute resource in the team1 namespace that matches traffic on the /anything/team1/foo prefix and routes traffic to the httpbin app in the team1 namespace. The child HTTPRoute resource does not select a specific parent HTTPRoute resource. Because of that, the child HTTPRoute resource is automatically selected by all parent HTTPRoute resources that delegate traffic to this child.

      kubectl apply -f- <<EOF
apiVersion: gateway.networking.k8s.io/v1
kind: HTTPRoute
metadata:
 name: child-team1
 namespace: team1
spec:
 rules:
 - matches:
   - path:
       type: PathPrefix
       value: /anything/team1/foo
   backendRefs:
   - name: httpbin
     port: 8000
EOF

  4. Create a RouteOption resource that aborts all requests with a 418 HTTP response code and apply this policy to the child-team1 HTTPRoute resource by using the spec.targetRefs section.

      kubectl apply -f- <<EOF
apiVersion: gateway.solo.io/v1
kind: RouteOption
metadata:
  name: child-team1-fault
  namespace: team1
spec:
  targetRefs:
  - group: gateway.networking.k8s.io
    kind: HTTPRoute
    name: child-team1
  options:
    faults:
      abort:
        percentage: 100
        httpStatus: 418
EOF

  5. Create the child-team2 HTTPRoute resource in the team2 namespace that matches traffic on the /anything/team2/bar/ prefix and delegates traffic to the grandchild HTTPRoute resource in the team2 namespace. Note that because the child delegates traffic to a grandchild, a PathPrefix matcher must be used.

      kubectl apply -f- <<EOF
apiVersion: gateway.networking.k8s.io/v1
kind: HTTPRoute
metadata:
  name: child-team2
  namespace: team2
spec:
  parentRefs:
  - name: parent
    namespace: gloo-system
    group: gateway.networking.k8s.io
    kind: HTTPRoute
  rules:
  - matches:
    - path:
        type: PathPrefix
        value: /anything/team2/bar/
    backendRefs:
    - group: gateway.networking.k8s.io
      kind: HTTPRoute
      name: "*"
      namespace: team2
EOF

  6. Create a RouteOption resource that rewrites prefix paths to /anything/rewrite apply this policy to the child-team2 HTTPRoute resource by using the spec.targetRefs section.

      kubectl apply -f- <<EOF
apiVersion: gateway.solo.io/v1
kind: RouteOption
metadata:
  name: child-team2-rewrite
  namespace: team2
spec:
  targetRefs:
  - group: gateway.networking.k8s.io
    kind: HTTPRoute
    name: child-team2
  options:
    prefixRewrite: /anything/rewrite
EOF

  7. Create a grandchild HTTPRoute resource that matches traffic on the /anything/team2/.* regex path and routes traffic to the httpbin app in the team2 namespace.

      kubectl apply -f- <<EOF 
apiVersion: gateway.networking.k8s.io/v1
kind: HTTPRoute
metadata:
  name: grandchild
  namespace: team2
spec:
  rules:
  - matches:
    - path:
        type: RegularExpression
        value: /anything/team2/bar/.*
    backendRefs:
    - name: httpbin
      port: 8000
EOF

Great job. You successfully deployed the multi-level route delegation example that is defined in the Configuration overview. Next, you verify that the policies are correctly inherited by sending requests along the different requests paths in the delegation chain.

Verify

Verify that the policies are correctly inherited along the delegation chain.

  1. Send a request to the delegation.example domain along the /anything/team1/foo path. Because child1-team1 inherits the response header policy from the parent and applies a fault injection policy that aborts all incoming requests, verify that you get back a 418 HTTP response code and that you see the test: bar header in your response.

      curl -vik http://$INGRESS_GW_ADDRESS:8080/anything/team1/foo \
-H "host: delegation.example:8080"
  
      curl -vik localhost:8080/anything/team1/foo \
-H "host: delegation.example"

    Example output:

       * Mark bundle as not supporting multiuse
   < HTTP/1.1 418 Unknown
   HTTP/1.1 418 Unknown
   < test: bar
   test: bar
   < content-length: 18
   content-length: 18
   < content-type: text/plain
   content-type: text/plain
   ...
   fault filter abort

  2. Send another request to the delegation.example domain along the /anything/team2/bar/test path. The grandchild inherits the response header policy from the parent and the rewrite policy from child-team2. Verify that you get back a 200 HTTP response code, that the request path is rewritten to /anything/rewrite, and the test: bar response header is added.

      curl -vik http://$INGRESS_GW_ADDRESS:8080/anything/team2/bar/test \
-H "host: delegation.example:8080"
  
      curl -vik localhost:8080/anything/team2/bar/test \
-H "host: delegation.example"

    Example output:

       * Mark bundle as not supporting multiuse
   < HTTP/1.1 200 OK
   HTTP/1.1 200 OK
   < access-control-allow-credentials: true
   access-control-allow-credentials: true
   < access-control-allow-origin: *
   access-control-allow-origin: *
   < content-type: application/json; encoding=utf-8
   content-type: application/json; encoding=utf-8
   < date: Tue, 11 Jun 2024 17:42:45 GMT
   date: Tue, 11 Jun 2024 17:42:45 GMT
   < content-length: 579
   content-length: 579
   < x-envoy-upstream-service-time: 5
   x-envoy-upstream-service-time: 5
   < test: bar
   test: bar
   < server: envoy
   server: envoy

   < 
   {
     "args": {},
     "headers": {
       "Accept": [
         "*/*"
       ],
       "Host": [
         "delegation.example:8080"
       ],
       "User-Agent": [
         "curl/7.77.0"
       ],
       "X-Envoy-Expected-Rq-Timeout-Ms": [
         "15000"
       ],
       "X-Envoy-Original-Path": [
         "/anything/team2/bar/test"
       ],
       "X-Forwarded-Proto": [
         "http"
       ],
       "X-Request-Id": [
         "d936987f-879f-474c-be2c-ed66e85944f4"
       ]
     },
     "origin": "10.XX.X.XX:49018",
     "url": "http://delegation.example:8080/anything/rewrite",
     "data": "",
     "files": null,
     "form": null,
     "json": null
   }

Cleanup

You can remove the resources that you created in this guide.

  kubectl delete httproute parent -n gloo-system
kubectl delete httproute child-team1 -n team1
kubectl delete httproute child-team2 -n team2
kubectl delete httproute grandchild -n team2
kubectl delete routeoption parent-remove-header -n gloo-system
kubectl delete routeoption child-team1-fault -n team1
kubectl delete routeoption child-team2-rewrite -n team2
kubectl delete -n team1 -f https://raw.githubusercontent.com/solo-io/gloo-mesh-use-cases/main/policy-demo/httpbin.yaml
kubectl delete -n team2 -f https://raw.githubusercontent.com/solo-io/gloo-mesh-use-cases/main/policy-demo/httpbin.yaml
kubectl delete namespaces team1 team2